View of the camera

Side view

The other side view

Bottom view

Rear view

The included accessories

View of the packaging

Megapixel camera DS-2CD853F-E is equipped with 1/3" CMOS sensor and IR cut filter mechanically removable (ICR). Its native resolution is 1600x1200 (UXGA). With a F1.2 lens, the camera can reach sensitivity of 0.01 lx in B/W mode. It can cooperate with a varifocal AI lens with C/CS mount. The ICR filter enables cooperation with IR illuminator(s) in low/zero light (e.g. Redbeam M1640, M1642) and natural color reproduction in daylight.

The video data can be transmitted and displayed at the following frame rates:
- 12.5 fps for resolutions of 1600×1200 and 1600×912,
- 25 fps for resolutions of 1280×960 and 1280×720.

Apart from resolution and frame rate, the user can change a number of parameters:

The camera has been equipped with the following connectors/interfaces:

The camera can cooperate with Pan-Tilt devices that are controlled through the RS485 interface. There are over 80 PTZ protocols available.
The built-in hardware motion detection enables the operator to define monitored zones and set sensitivity.

Any alarm (change of the state of alarm input) can generate:

• OSD info,
• alarm sound,
• action triggered by alarm output.

The camera uses NAS technology, so it has the ability to send data directly to the disk storage connected to the network, which significantly reduces the costs of maintaining CCTV systems. Video transmission via RTSP protocol allows the use of streaming video servers and access to the video embedded on websites for many users simultaneously.

The camera supports the following alarm events:

• motion detection,
• video loss,
• loss of network connection,
• IP address conflict,
• storage exception.

DS-2CD853F-E K1443 cameras are recommended for hybrid CCTV systems using HIKVISION/ULTIMAX DVRs. The IVMS-4000 software, supplied with the cameras, allows for live monitoring, video recording and playback from up to 50 Hikvision devices, e.g. 25 IP cameras and 25 DVRs (regardless of the number of channels).

The software enables the user to set parameters of displaying and recording, configure network, perform remote firmware updates, define local users, manage network storage, handle alarm events.

More on IVMS-4000 software in the article Network applications for security systems and remote monitoring: iVMS4000, NVR Server, Stream Media Server - powerful and free.