You are not logged in
MY CART
My Cart is empty
 »  LAN & WLAN  »  Access Points  »  2.4 and 5 GHz
Access Points
2.4 and 5 GHz
Access Point: Compex WP54AG (802.11a/b/g; 2.4 & 5 GHz DUAL BAND; 2x LAN - PoE)- CLEARANCE SALE!
 
Access Point: Compex WP54AG (802.11a/b/g; 2.4 &5 GHz DUAL BAND; 2x LAN - PoE)- CLEARANCE SALE!
View of the device

Access Point: Compex WP54AG (802.11a/b/g; 2.4 &5 GHz DUAL BAND; 2x LAN - PoE)- CLEARANCE SALE!
Rear view

Access Point: Compex WP54AG (802.11a/b/g; 2.4 &5 GHz DUAL BAND; 2x LAN - PoE)- CLEARANCE SALE!
The included accessories

Access Point: Compex WP54AG (802.11a/b/g; 2.4 &5 GHz DUAL BAND; 2x LAN - PoE)- CLEARANCE SALE!
View of the packaging

WP54AG is dual-band wireless device compliant with 802.11a/b/g standards. WP54AG provides high efficiency and stability of links due to implementation of newest security measures: Wi-Fi Protected Access (WPA), IEE 802.11x authentication, 64-bit or 128-bit Wired Equivalent Privacy (WEP). Compex has introduced in this AP an inventive technology - Pseudo VLAN and TagVLAN - allowing to use this device as Hot Spot.
The device is prepared for work in many points of a network, in 6 possible modes: Access Point, Access Point Client, Point to Point, Point to Multiple Point, Gateway, Wireless Routing Client, without a need of changing software. The Access Point has DFS in all modes of work, radar detection, adjustable ACK parameter, WMM (QoS), WDS, radio-off in case of disconnected LAN, auto reboot timer, VLAN.

There are also available two LAN ports and integrated PoE adapter (IEEE802.3af), which increases functionality of the device.
Specifications
Name

Compex WP54AG

Code

N2520
Standards

IEEE802.11a/b/g
Modulation

OFDM (BPSK, QPSK, 16-QAM,
64-QAM), DSSS (DBPSK, PQPSK, CCK)
Frequency range

802.11a

5150-5350 MHz,
5470-5725 MHz

802.11b/g

2412-2484 MHz
RF chipset

Atheros AR5413
RF power

802.11a: Max. 20 dBm
802.11b: Typ. 19 dBm
802.11g: Typ. 17 dBm
Power adjustment

Yes, 1 dBm step
Sensitivity

802.11a

6 Mbps : -92dBm
54 Mbps : -73dBm

802.11b/g

1Mbps : -95dBm
11Mbps : -90dBm
6Mbps : -92dBm
54Mbps: -73dBm
Transfer rates

54, 48, 36, 24, 18, 12, 11, 5.5, 2, 1 Mbps
Modes of work

Access Point Bridging,
Access Point Client,
Gateway,
Wireless Routing Client,
Wireless Ethernet Atapter,
Point to Point,
Point to Multipoint
DHCP server

Yes
Reservation in DHCP

Yes, according to MAC addresses
Firmware upgrade

Yes
Advanced functions

Long Range Parameter Settings (ACK), WDS, Wireless pseudo VLAN
Built-in protection measures

64 - bit / 128 - bit WEP
WPA-EAP, WPA-PSK, WPA2-EAP, WPA2-PSK
pseudo Virtual LAN
Tagged VLAN
IEEE 802.1x – TLS, TTLS, PEAP, EAP-SIM
MAC address filtering
Antenna (detachable)

2dBi dipole, possibility of connecting an external antenna
Antenna connector

SMA R/P
Port LAN

IEEE802.3u (Fast Ethernet)
LAN ports

2 x LAN 10/100M (RJ-45 UTP/STP)
LEDs

Power, Diagnostic, WAN, WLAN, LAN1, LAN2
Management

WWW browser, SNMP, SSL, Telnet, SSH
Operating temperature

-20°C to 70°C
Maximum humidity

10%...80% (no condensation)
Certificates

CE, FCC
Dimensions

145x132x41mm (LxWxH)
Power supply

24VDC/0.5A (AC/DC adaptor incl.)
PoE: IEEE802.3af (48V)

Contents

WP54AG, AC/DC power adapter, antenna, CD with software and instruction manual

Flexibility of Compex AP. The Access Point Compex WP54AG N2520 stands out from other similar equipment with variety of possible modes of work:
  • Access Point - regular AP,
  • Access Point Client - AP client which masks MAC addresses of computers connected from LAN side,
  • Point to Point - link for connecting two networks,
  • Point to Multiple Point - offers possibility of cooperation of up to 15 Access Points, creating one big network,
  • Wireless Routing Client - AP with router function from wireless side,
  • Gateway - AP with router function from wire side,
  • WDS.
The most interesting mode of operation seems to be Wireless Routing Client. In this kind of work the WAN interface is really wireless port, which enables the user to share one allowed IP address among a number of computers (it also ensures router, NAT, DHCP and firewall functionality). It is a very rare although so usable function.
AP Compex WP54AG in Wireless Routing Client mode
DFS and TPC in Compex WP54AG. Access Point Compex WP54AG N2520 is one of the few APs capable of working with Dynamic Frequency Selection (DFS). The AP automatically sweeps all channels and selects the best one. The function is active in standard AP mode and for APs in WDS mode. In the latter case, after entering MAC addresses of working Access Points and choosing SmartSelect option, all devices find one common channel to set up the connection. Due to Transmitter Power Control (TPC) there is possibility of precise adjustment of output power sufficient for proper link quality.
Point to Point mode and data encryption. The AP WP54AG N2520 configured in Point to Point mode belongs to the small group of devices enabling 64- or 128-bit WEP encryption. It is possible both in 5 GHz and 2.4 GHz band. This solution allows users to build bridges and secure transmitted data. Additionally they can systematically view status of connection and statistics, test signal level in dBm and transfer rate in Mbps. There may be also useful two LAN ports, integrated PoE adapter and possibility of ACK adjustment.
Easy configuration of Compex WP-54AG. The new Compex WP-54AG N2520 is supported by very usable software pack that makes the setup of the device quite easy job and does not require any changes of TCP/IP settings in the computer. The program uConfig allows for finding IP addresses of Compex devices even when they are deployed in a different network or subnetwork. To get connection with Compex there should be changed IP address and the mask of the computer's subnetwork, according to default settings of the device. The program uConfig enables automatic detection of Compex devices, e.g. WP-54AG N2520. There are then displayed their IP addresses and after clicking button it is possible to access them via the browser. For the time of configuration the program will automatically change network settings in the computer. Even in the case of older versions of Windows there is no need of restarting the system.
 
COMPLETE WITH
PoE Power Supply PSA16U-480
PoE Adapter (with leads)
SECTION LIBRARY
»
ULTIAIR (2)
»
Case Studies (9)
»
Some Theory (4)
»
About Connectors (1)
LIBRARY NEW TITLES
»
DVB-T and analog TV in a modern MATV system
»
ULTIMODE Home System - applications and diagrams
»
Configuring TP-Link router using Windows 7 and connecting to the WiFi network without knowing the password
»
Locations and parameters of terrestrial digital and analog TV transmitters in Poland
More titles »
TO KNOW MORE
»
Basics of designing MATV/community antenna systems
Community antenna (MATV system) may be defined as antenna installation where compensation of network attenuation is performed by one (central) set of amplifiers. The... more »
»
LAN for IP video surveillance
How to design, install, and operate LANs used for transmission of video data (IP CCTV). Video surveillance systems based on IP CCTV devices need adequate IP networks for... more »
»
Home and business Wi-Fi networks - applications of TP-LINK family
Ready-to-use solutions for home and business - WLAN (and LAN) applications of TP-Link devices.
TP-Link in one of the leading manufacturers of network devices for... more »
 
Regulations | Complaints | Download | Sitemap All Rights Reserved © 2012 DIPOL S.J.