MY CART
My Cart is empty

Discontinued items

Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver) - CLEARANCE SALE!
Code: M16743
Withdrawn from the offer
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Front view

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Rear view
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the packaging
Etrix 1VADA-R is used to receive video, audio, and data from one CCTV camera via 8-wire CAT5e UTP cable over distances up to 2400 m (using active transmitter and preserving original quality).
The device matches the 100 ohm impedance of the balanced transmission lines to the 75 ohm impedance of unbalanced inputs of a DVR etc. Used in video surveillance systems, such devices allow efficient design of transmission lines without hard wiring.
LED indicators
  • red: POWER
  • green: VIDEO
Distinguishing features
  • reception of one video signal
  • reception of one audio signal
  • two data channels
  • cooperation with passive transmitters (the maximum transmission distance is 1500 m)
  • cooperation with active transmitter (the maximum transmission distance is 2400 m)
  • built-in anti-interference filters
The type of cable and connector wiring
A UTP cable rated CAT5 or higher is required. The quality of the cable used has a direct impact on the image quality and transmission range.
The wires should be connected (using a crimping tool, e.g. J9210) in accordance with the scheme TIA/EIA-586B for RJ-45 connectors. Coaxial cables terminated with BNC plugs are to be connected to the BNC sockets.
RJ-45 wiring
Settings
"Sharpness" DIP switch allows to adjust the receiver to the parameters of transmission line in order to get the best results. A suitable brightness level of the received video can be set with "Brightness" knob.
Application diagram
The combination of active transmitter and receiver
allowing transmission of video, audio, and data
Specifications:
NameEtrix 1VADA-R
CodeM16743
Frequency range
0...8 MHz
CMRR60 dB
Impedance of coaxial outputs75 ohm
Impedance of balanced inputs100 ohm
Differential capacity (max)62 pF/m
Supported standards
NTSC, PAL, SECAM, CCIR
Power12 VDC / 160 mA
Operating temperature-10...70 °C
Storage temperature-30...70 °C
Dimensions105 x 58 x 29 mm
(except for BNC sockets)
Withdrawn from the offer
 
Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver) - CLEARANCE SALE!
Code: M16743