MY CART
My Cart is empty
Installation Components
Baluns
Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver)
Code: M16743
 
Price
Disc.
Quantity
12.82 EUR
0 %
Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver)
Front view

Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver)
Rear view
Active Video-Audio-Data Balun: Etrix 1VADA-R (receiver)
View of the packaging
Etrix 1VADA-R is used to receive video, audio, and data from one CCTV camera via 8-wire CAT5e UTP cable over distances up to 2400 m (using active transmitter and preserving original quality).
The device matches the 100 ohm impedance of the balanced transmission lines to the 75 ohm impedance of unbalanced inputs of a DVR etc. Used in video surveillance systems, such devices allow efficient design of transmission lines without hard wiring.
LED indicators
  • red: POWER
  • green: VIDEO
Distinguishing features
  • reception of one video signal
  • reception of one audio signal
  • two data channels
  • cooperation with passive transmitters (the maximum transmission distance is 1500 m)
  • cooperation with active transmitter (the maximum transmission distance is 2400 m)
  • built-in anti-interference filters
The type of cable and connector wiring
A UTP cable rated CAT5 or higher is required. The quality of the cable used has a direct impact on the image quality and transmission range.
The wires should be connected (using a crimping tool, e.g. J9210) in accordance with the scheme TIA/EIA-586B for RJ-45 connectors. Coaxial cables terminated with BNC plugs are to be connected to the BNC sockets.
RJ-45 wiring
Settings
"Sharpness" DIP switch allows to adjust the receiver to the parameters of transmission line in order to get the best results. A suitable brightness level of the received video can be set with "Brightness" knob.
Application diagram
The combination of active transmitter and receiver
allowing transmission of video, audio, and data
Specifications:
Name Etrix 1VADA-R
Code M16743
Frequency range
0...8 MHz
CMRR 60 dB
Impedance of coaxial outputs 75 ohm
Impedance of balanced inputs 100 ohm
Differential capacity (max) 62 pF/m
Supported standards
NTSC, PAL, SECAM, CCIR
Power 12 VDC / 160 mA
Operating temperature -10...70 °C
Storage temperature -30...70 °C
Dimensions 105 x 58 x 29 mm
(except for BNC sockets)
Price
Disc.
Quantity
12.82 EUR
0 %