| CCTV |  |
|
Installation Components |
||
PRINTActive Video Receiver: ATR-1
20.91 EUR | ||
Discount: 0% | ||
View of the receiver
View of the opposite side
View of the packaging
The ATR-1 receiver cooperates with ATT-1 transmitter. The set ("UTP transceiver") allows to transmit video signal from a CCTV camera over longer distances (up to 2000m), via typical twisted pair cable (UTP/FTP/STP - category 5). The installer should pay attention to connecting the appropriate leads to the correct terminals: (+) to (+) and (-) to (-).
The receiver can also cooperate with passive video transformers used for long-range video transmission via twisted pair cables.
The receiver can also cooperate with passive video transformers used for long-range video transmission via twisted pair cables.
Description of control elements (rear panel):
- Brightness - adjustment of output signal level
- Sharpness - contrast correction.
The device has been equipped with two LEDs:
- red - POWER ON
- green - video signal
Specifications:
| Name | ATR-1 |
| Code | M1672 |
| Power | DC 12 V / 50 mA |
| Number of video channels | 1 |
| Band | 0 ... 9 MHz (-3 dB) |
| Impedance of symmetrical input | 100 Ω |
| Impedance of video output | 75 Ω (BNC female) |
| Symmetrical connector | 2-port (push-in) |
| Power connector | DC female jack (5.5/2.1 mm) |
| Weight | 0.10 kg |
| Dimensions (W x H x D) | 103 x 20 x 72 mm |
| Operating temp. / relative humidity | 0ºC...+55ºC / <95% |
20.91 EUR | ||
Discount: 0% | ||
