| CCTV | ![]() |
|
Installation Components |
||
Active Video Transmitter: ATT-1
14.90 EUR | ||
Discount: 0% | ||
The ATT-1 transmitter cooperates with ATR-1 receiver. The set ("UTP transceiver") allows to transmit video signal from a CCTV camera over longer distances (up to 2000m), via typical twisted pair cable (UTP/FTP/STP - category 5). The installer should pay attention to connecting the appropriate leads to the correct terminals: (+) to (+) and (-) to (-).
The transmitter can also cooperate with passive video transformers used for long-range video transmission via twisted pair cables.
NOTICE! The device should be placed as close as possible to the CCTV camera.
The device has been equipped with two LEDs:
- red - POWER ON
- green - video signal
The "LEVEL" switch adjusts video level for different ranges of distance:
| Mark | Range [m] |
| L | 0 – 1200 |
| M | 1200 – 1800 |
| H | > 1800 |
Specifications:
| Name | ATT-1 |
| Code | M1673 |
| Power | DC 12 V / 50 mA |
| Number of video channels | 1 |
| Band | 0...9 MHz (-3 dB) |
| Impedance of symmetrical output | 100 Ω |
| Impedance of video input | 75 Ω (BNC female) |
| Symmetrical connector | 2-port (push-in) |
| Power connector | DC female jack (5.5/2.1 mm) |
| Weight | 0.10 kg |
| Dimensions (W x H x D) | 103 x 20 x 72 mm |
| Operating temp. | 0ºC...+55ºC |
14.90 EUR | ||
Discount: 0% | ||



PRINT


