| No. | Name | Code |
1 |
|
|
|
|
| This multi-band amplifier has been designed for use in one-family homes and other small antenna systems. ... more »
|
|
|
| B11589 |
2 |
|
|
|
|
| This broadband amplifier (gain adjustment for FM, BIII, and VHF/UHF bands) with additional UHF input has been designed for use in one-family homes and other small antenna systems. ... more »
|
|
|
| B11586 |
3 |
|
|
|
|
| The preamplifier has been designed for placing in antenna box. Input impedance: 300 ohm (balanced); output impedance: 75 ohm. ... more »
|
|
|
| B4009 |
4 |
|
|
|
|
| Broadband RF amplifier AWS-1036 has been designed for applications in individual and community antenna systems. The device has one input, and four outputs with independent level controls.... more »
|
|
|
| B11587 |
5 |
|
|
|
|
| House/building amplifier HA-204R65 is equipped with output stage using Gal-As semiconductor components, working in push-pull mode. The amplifier has been designed for cable and MATV systems with return path/channel.
It enables signal level equalization in forward and return path.... more »
|
|
|
| R82308 |
6 | | R90102 |
7 |
|
|
|
|
| AI-200 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 318 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF bands, the levels of signals can be equalized. This makes it easier to build installations using a single cable to distribute signals from several antennas (combined in a diplexer etc).... more »
|
|
|
| R90450 |
9 |
|
|
|
|
| Building amplifier from Alcad, used in community / cable TV systems. It compensates attenuation of the distribution network and enables equalization of cale characteristics. The amplifier has been also equipped with 10dB amplifier in the return channel, so it can be employed in multimedia cable networks. ... more »
|
|
|
| R90446 |
10 |
|
|
|
|
| The CF-716 amplifier is used to amplify and distribute satellite and terrestrial TV, and FM radio signals. This model is a special one, designed for the use in medium and large community installations working within 86 - 862 MHz band as well as and in the first intermediate satellite frequency band 950 - 2150 MHz. It has one wideband input. Gain adjustment, and cable's characteristic correction have been anticipated (the last - within terrestrial TV band; for sat. IF - fixed at 6 dB ). The amplifier is equipped with test outputs both for input and output. ... more »
|
|
|
| R90443 |
11 |
|
|
|
|
| Amplifier AI-223 is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in full FM + TV band 86 - 862 MHz. As there are no empty spaces in the working band, the amplifier can be used in any cable network. It can also be used to distribute signals in group/community installations. Gain adjustment allows for adequate correction of signal loss in cabling.... more »
|
|
|
| R90452 |
12 |
|
|
|
|
| CA-210 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 400 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF band, amplifying level can be set to fit the signal level best for each. This makes installations using a single cable to send signals from all the antennas easier to set properly. ... more »
|
|
|
| R90460 |
13 |
|
|
|
|
| CA-215 amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 400 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF band, the levels can be set to fit the strength of the signals.... more »
|
|
|
| R90461 |
14 |
|
|
|
|
| The channel amplifier is pre-tuned to desired channel by the producer - making an order it is essential to give the number of the channel that is needed.... more »
|
|
|
| R905039 |
15 |
|
|
|
|
| The band amplifier covers whole FM band (88-108 MHz) and allows to distribute FM broadcasts within antenna installation. It cooperates with ZG-401, ZG-601 series.... more »
|
|
|
| R90512 |
16 |
|
|
|
|
| High-end channel amplifier pre-tuned to a desired channel by the manufacturer - making an order it is essential to give the number of the channel that is needed. Designed for distributing signals in medium, large and very large MATV/SMATV systems.... more »
|
|
|
| R90517 |
17 |
|
|
|
|
| The amplifier is designed for using together with multiswitches, e.g. when the distance between the multiswitch and terminal socket(s) is to big for direct connection. But the main purpose for employing the AI-414 device is splitting satellite and TV/FM signals within an apartment or house, where several outlets are needed. It is well to remember that within the apartment installation only one satellite receiver can be used, which may be connected to any of the outputs. The terrestrial signals are simultaneously available at all outlets. The amplifier transmits reversely any possible control signals DiSEqC, 22kHz, 14/18V.... more »
|
|
|
| R904075 |
18 |
|
|
|
|
| The CA-313 amplifier is used to amplify and distribute TV and FM radio signals. It is a brand-name device designed for use in small and medium-size community installations (MATV systems). CA-313 is equipped with five band inputs, which make it a very useful amplifier for applying several antennas receiving signals from different directions. The employed in this model input partition enables better equalization of signal levels.... more »
|
|
|
| R904058 |
21 |
|
|
|
|
| The AM-407 amplifier has been designed for outdoor use as a mast device. It is used for signal amplification to a level required by several receivers. It can be fed from typical 24 V / 100 mA power supply with RF/DC separator. Feeding from another amplifiers providing power through the coax cable is also possible. While connecting preamplifiers it must be remembered to check the overall current consumption in order not to exceed the power supply's maximum capacity, or in advance to choose adequate one. The amplifier is characterized by low noise ratio.... more »
|
|
|
| R903031 |
22 |
|
|
|
|
| The AM-316 amplifier has been designed for outdoor use as mast device. The item can be applied within small antenna installations (several to a dozen or so outlets).... more »
|
|
|
| R903052 |
23 |
|
|
|
|
| The AL-105 supplier is dedicated for powering 12V family of Alcad amplifiers installed on antenna masts. AL-105 is not intended for unprotected outdoor use. It should not be installed in areas with increased humidity, near heaters, radiators and in other hot or cool (in winter) places. The unit requires natural ventilation, so it must not be covered by any objects. It ought not to be connected to the mains until all connections within an antenna installation have been properly made.... more »
|
|
|
| R903087 |
24 |
|
|
|
|
| The AM-417 amplifier has been designed for outdoor use as a mast device. The item can be applied within small antenna installations (several to a dozen or so outlets). It can be fed from a typical 12 V / 100 mA power supply with RF/DC separator e.g. ZS12/100 D0010. It can be also powered via coax cable from some used within an installation amplifier e.g. CA-215 R90461. The amplifier is characterized by low noise ratio.... more »
|
|
|
| R903717 |
25 |
|
|
|
|
| The AL-100 supplier is dedicated for powering 24V family of Alcad amplifiers installed on antenna masts. AL-100 is not intended for unprotected outdoor use. It should not be installed in areas with increased humidity, near heaters, radiators and in other hot or cool (in winter) places. The unit requires natural ventilation, so it must not be covered by any objects. It ought not to be connected to the mains until all connections within an antenna installation have been properly made.... more »
|
|
|
| R90386 |
26 |
|
|
|
|
| The CA-311 amplifier is used to amplify and distribute TV and FM radio signals. It is a brand-name device designed for the use in small and medium size community installations. The CA-311 is equipped with two band inputs and two outputs. This model fills up the gap among CA-210, CA-215, AI-200 and CF-512 amplifiers. The amplifier is fed from its internal stabilized power supply, which is powered directly from the mains.... more »
|
|
|
| R904011 |
27 |
|
|
|
|
| The CA-310 amplifier is used to amplify and distribute TV and FM radio signals. This model is a typical one, designed for the use in small and medium size community installations. It has three band inputs, two main outputs, and additional test output (-30 dB) used to couple a measuring device or spectrum analyzer. The amplifier supplements the group of CA-210 R90460, CA-215 R90461, AI-200 R90450.... more »
|
|
|
| R904014 |
28 | | R904025 |
29 |
|
|
|
|
| The CA-312 amplifier is used to amplify and distribute TV and FM radio signals. It is a brand-name device designed for the use in small and medium size community installations. The CA-312 is equipped with four band inputs and two outputs. This model fills up the gap among CA-210, CA-215, AI-200 and CF-512 amplifiers. The amplifier is fed from its internal stabilized power supply, which is powered directly from the mains.... more »
|
|
|
| R904039 |
30 |
|
|
|
|
| The channel amplifier is pre-tuned to a desired channel by the producer - making an order it is essential to give the number of the channel that is needed, within the whole cable band (including hyperband) i.e. 110-174 MHz and 230-470 MHz.... more »
|
|
|
| R90538 |
31 |
|
|
|
|
| This frame is dedicated for assembling ZG-401, ZG-601, and ZG-421 channel amplifiers, ZG-201 FM amplifier, CO-405 and CO-705 channel converters, AS-102 power supply.... more »
|
|
|
| R905514 |
32 |
|
|
|
|
| The RF amplifier AWS-1143 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11685 |
33 |
|
|
|
|
| The RF amplifier AWS-1144 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11686 |
34 |
|
|
|
|
| Shielded antenna preamplifier LNA-169 has been designed for placing in antenna box. It is an ideal solution in the case of weak signal levels. The broadband preamplifier covers BIII, IV, V bands. Metal housing eliminates susceptibility to interferences, as well as does not allow to radiate EM energy. The device is CE certified.... more »
|
|
|
| B4008 |
35 |
|
|
|
|
| The broadband amplifier AWS-1241 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117023 |
36 |
|
|
|
|
| The broadband amplifier AWS-1242 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117024 |
37 |
|
|
|
|
| The broadband amplifier AWS-1243 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117025 |
38 |
|
|
|
|
| The broadband amplifier AWS-1244 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117026 |
39 |
|
|
|
|
| Amplifier for small community antenna installations (MATV systems). Having two UHF inputs, it eliminates in many cases the need of employing antenna diplexer. Solid housing protects the amplifier against external interferences.... more »
|
|
|
| B11583 |
40 |
|
|
|
|
| The amplifier has been designed for use in small antenna installations/MATV systems where there is a need of distributing return signals, e.g. from sat receivers, CCTV cameras etc. ... more »
|
|
|
| B11585 |
41 |
|
|
|
|
| The amplifier can improve FM reception in low-signal areas. It is an ideal device for cooperation with majority of the offered FM antennas. 75 ohm input/output impedance, compliance with CE standards.... more »
|
|
|
| B9013 |
42 |
|
|
|
|
| The RF amplifier AWS-1142 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11684 |
43 |
|
|
|
|
| The RF amplifier AWS-1141 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11683 |
45 |
|
|
|
|
| The bridge is used with channel amplifiers of ZG series. Every ZG amplifier is equipped with one ZP-002 bridge (for combining signals at the output). Additional ZP-002 bridges are needed for connecting inputs of a group of channel amplifiers using the same antenna. ... more »
|
|
|
| R90552 |
46 | | R912093 |
47 |
|
|
|
|
| The DA Signal antenna is designed for indoor operation and dedicated for reception of terrestrial digital broadcasts. The device has very good RF parameters due to employing high class low noise amplifier. The antenna is suitable for receiving signals with vertical and horizontal polarization.... more »
|
|
|
| A6030 |
48 | | M1843 |
49 |
|
|
|
|
| Universal TV antenna (ch. 5-12 & 21-69) for mobile applications. The included power supply with RF/DC separator allows to provide power to the amplifier. The antenna can be used on a holiday trailer/caravan or a yacht. Packed in cardboard box.
... more »
|
|
|
| A5254 |
50 |
|
|
|
|
| The preamplifier LNA-101 has been designed for mounting just in antenna box. Such amplifiers are necessary in the case of low signal levels, longer antenna cables, or splitting antenna signal. They also match 300 ohm antenna impedance to 75 ohm impedance of coaxial cable. ... more »
|
|
|
| B4007 |
51 |
|
|
|
|
| Broadband antenna (ch.6-69), packed in foil. Aluminum parts with golden galvanic coloring, electro-galvanized steel structural components. The set includes shielded RF amplifier and AC/DC adapter with RF/DC separator allowing to provide power to the amplifier, with the same cable which sends the signal from the antenna to the receiver.... more »
|
|
|
| A0029 |
52 |
|
|
|
|
| Broadband antenna (ch. 6-69), packed in foil. Aluminum parts, electro-galvanized steel structural components. The set includes shielded RF amplifier and AC/DC adapter with RF/DC separator allowing to provide power to the amplifier with the same cable which sends the signal from the antenna to the receiver.... more »
|
|
|
| A0034 |
55 |
|
|
|
|
| This amplifier is designed for final amplification of satellite IF signals from converters (processors) before putting them into distribution network.... more »
|
|
|
| R91217 |
56 | | R90100 |
57 |
|
|
|
|
| Broadband antenna (ch.6-69), packed in foil. Aluminum parts with golden galvanic coloring, electro-galvanized steel structural components. The set includes shielded RF amplifier and AC/DC adapter with RF/DC separator allowing to provide power to the amplifier, with the same cable which sends the signal from the antenna to the receiver.... more »
|
|
|
| A0024 |
59 |
|
|
|
|
| It is three-input, one-output antenna amplifier for small TV installations. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier has switches allowing to provide +12 V power to preamplifiers installed near UHF antenna. The amplifier can also be fed through the output (via coaxial cable). There are separate gain adjustments for each input.... more »
|
|
|
| B11682 |
60 |
|
|
|
|
| Amplifier for home antenna installations. It can provide +12 V power to preamplifier installed near the antenna. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier can also be fed through its output. It is possible when connecting another power supply with separator (not included) to the coax cable coupled with the output.... more »
|
|
|
| B11687 |
61 |
|
|
|
|
| Amplifier for home TV installation. The amplifier can provide +12 V power to preamplifier installed near the antenna. The 12V/100mA (output) stabilized power supply is included in the set. The amplifier can also be fed through one of its outputs (this one marked with [DC]). It is possible when connecting another power supply with separator (not included) to the coax cable coupled with the output.... more »
|
|
|
| B11688 |
62 |
|
|
|
|
| Broadband amplifier for home TV installations (also for distributing cable TV to multiple receivers). The amplifier can provide +12VDC voltage to a preamplifier installed on/near the antenna. 12V/120mA (output) stabilized power supply is included in the set. The amplifier can also be fed through one of its outputs (this one marked with "DC" - input A). It is possible when connecting another power supply with separator (not included) to the coax cable coupled with the output.... more »
|
|
|
| B11689 |
63 |
|
|
|
|
| It is one-input, four-output antenna amplifier for small TV installations. The12V/100mA (output) stabilized power supply is included in the set. The amplifier has switch allowing to provide +12 V power to preamplifier installed near the antenna. It can be also fed through one of the outputs (via coaxial cable).... more »
|
|
|
| B1170 |
65 |
|
|
|
|
| It is four-input, one-output antenna amplifier for small TV installations. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier has switches allowing to provide +12 V power to preamplifiers installed near UHF antenna. The amplifier can also be fed through the output (via coaxial cable). There are separate gain adjustments for each input.... more »
|
|
|
| B11883 |
66 |
|
|
|
|
| This broadband amplifier can be used in cable networks or MATV installations. It is advised to use it when the signal level is too low. The AWS-1/1F amplifier is fed from the external stabilized power supply making the full set. It is not designed for use in open spaces. It cannot be installed in wet conditions or near heaters and similar equipment. Providing natural ventilation is a must - the supplier must not be covered by any object. To avoid any possible damage, power should not be switched on until all connections are properly made.... more »
|
|
|
| B1216 |
67 |
|
|
|
|
| Channel amplifier is used in extremely bad reception cases. It allows to achieve the demanded level of the channel which is much weaker than others. The device can be used as a preamplifier.... more »
|
|
|
| B2010 |
68 |
|
|
|
|
| The device is used in particular area where listed below channels are broadcasted and generally there are hard conditions of reception. The amplifier allows to connect three antennas from which:... more »
|
|
|
| B2140 |
71 |
|
|
|
|
| Four-input antenna amplifier for home TV installations. The 12V/100 mA (output) stabilized power supply with RF/DC separator is included in the set. The amplifier is fed through the same coaxial cable which transmits the signal from the amplifier to the receiver.... more »
|
|
|
| B11551 |
72 |
|
|
|
|
| FM antenna (88-108 MHz), H/V polarizations (H - bidirectional, V - omnidirectional) with 75 ohm impedance (built-in amplifier, without power supply).
... more »
|
|
|
| A0229 |
73 |
|
|
|
|
| Indoor FM antenna (88-108 MHz) packed in cardboard box. The included AC/DC adapter is equipped with output voltage regulation that adjusts the built-in amplifier's gain. The RF cable is terminated with antenna connector.... more »
|
|
|
| A0240 |
74 |
|
|
|
|
| Indoor TV antenna (ch. 6-69), packed in cardboard box. AC/DC adapter with output voltage regulation that adjusts gain of the built-in amplifier. There is included cable terminated with antenna plug.... more »
|
|
|
| A0250 |
75 |
|
|
|
|
| Universal broadband TV antenna (can be used outdoors), with F output. The set includes AC/DC adapter with RF/DC separator allowing to provide power to the built-in antenna amplifier via the coax.... more »
|
|
|
| A5060 |
76 |
|
|
|
|
| Active indoor broadband TV antenna (ch. 1-69) for using in a room. The set includes AC/DC adapter. The antenna is equipped with cable terminated with antenna plug. The set is packed in cardboard box.... more »
|
|
|
| A5250 |
77 |
|
|
|
|
| This antenna amplifier has two inputs and two outputs, and is designed for home TV installations. The 12 V/100 mA (output) stabilized power supply is a part of the set.... more »
|
|
|
| B1018 |
78 |
|
|
|
|
| This antenna amplifier has two inputs and two outputs, and is designed for home TV installations. The 12 V 100 mA (output) stabilized power supply and the preamplifier (to be installed in the UHF antenna's box) are included in the set.... more »
|
|
|
| B1019 |
79 |
|
|
|
|
| Antenna amplifier with three inputs and two outputs, designed for home TV installations. The 12VDC 100 mA (output) stabilized power supply is included in the set.... more »
|
|
|
| B1025 |
81 |
|
|
|
|
| Antenna amplifier with one input and two outputs, designed for home TV installations. The 12VDC 100mA (output) stabilized power supply is included in the set.... more »
|
|
|
| B1066 |
82 | |
