cien cien
cien
DIPOL
holder
 
 Home / Popular / Antenna You are not logged in 
  Popular
 
Antenna
 

 
No.NameCode
1
UHF antenna with high gain, designed for low signal areas (reception of broadcasts from distant transmitters).... more »
A3380
2
This "sail" Dual 5G-23D antenna in fact consists of two directional 5 GHz antennas with 23 dBi gain (max) and 9 deg beamwidth, from a new TechnoLogic series. The series has been designed for the most demanding customers. The two integrate 5G-23D panel antennas have perpendicular polarizations, so that they do not interfere each other. The Technologic Dual 5G-23D antennas enable the users to establish efficient N-streme Dual links.... more »
A73522
3
Satellite dish suitable for mobile applications - at campground, on a trailer/caravan. It can be mounted with the sucker, or on a mast. Mounting/demounting is an easy task. During the tests performed in Krakow (Hotbird 13oE, overcast and rain) we got BER of the signal 10-3 (before correction). Such value allowed satisfactory reception of MPEG-2 stream.... more »
A9535
4
Antenna with built-in balun impedance transformer and 10-meter cable with SMA R/P plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
A7019
5
Antenna with built-in balun impedance transformer and 10-meter cable with SMA R/P connector. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
A7029
6
The directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band. It is a perfect tool for solving the frequent problem that our comfortable place is not the best one for using the laptop with UMTS card or simply the UMTS mobile. The problem of unstable signal will be overcome by attaching the antenna allowing comfortable work (or entertainment!).... more »
A7037
7
The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity. The antenna is equipped with integrated 5m RF cable, terminated with SMA/RP plug.... more »
A7042
8
Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.... more »
A7045
9
Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.... more »
A7046
10
Galvanized antenna bracket designed for mounting antennas/dishes on vertical flat surfaces.... more »
E8735C
11
The 5G-23D model is a directional panel antenna for 5 GHz band from TechnoLogic series. The antenna has been fully integrated with additional casing, resistant to adverse weather conditions, which can house another device. This model is suitable for mounting e.g. the RouterBoard 133/411, ALIX3C1, CA8-4, WLA-5000AP, RDAA-81, U.LD , WRAP.2C devices.... more »
A73552
12
Tri Digit is 44-element antenna for the whole UHF band (ch. 21-69). Due to special design, the array, despite its compact size, has a very high gain. It is equipped with impedance transformer. The main elements are made of aluminum, structural parts are made of steel and galvanized. The Tri Digit antenna is sold in the form nearly ready to use (assembled in 90%) in individual packaging (white cardboard box) containing instruction leaflet. Bulk packaging: five-packs (five boxes wrapped in foil).... more »
A2670
13
GrandEter 11 is an omnidirectional antenna for use in base stations running at 5 GHz. The antenna has vertical polarization. It contains low-loss microwave laminate. The antenna is suitable for building base stations for clients situated at distances up to 1-2 km.... more »
A73323
14
The "Arka" Dual 5G-19D model from a new TechnoLogic series contains two directional antennas for 5 GHz band, with 19dBi gain and 15-degree beam. "Arka" Dual 5G-19D has been designed for the most demanding customers. In fact it is two panel antennas 5G-19D put into a single housing. The two antennas radiate orthogonal beams that do not interfere one with another. "Arka" Dual 5G-19D enables the user to provide efficient wireless connectivity (N-streme Dual) at distances up to 5 km.... more »
A73521
15
The "Arka" Dual 5G-17S model from a new TechnoLogic series contains two sector antennas for 5 GHz band, with 17dBi gain and 90-degree horizontal beam. "Arka" Dual 5G-17S has been designed for the most demanding customers. In fact it is two sector antennas 5G-17S A73513 put into a single housing. The two antennas radiate beams with identical geometrical parameters (90 degrees), covering the desired area with double-strength signal. "Arka" Dual 5G-17S enables the user to provide efficient wireless connectivity in areas with other wireless networks working simultaneously in 5 GHz band, where high data rates required by clients have to be supported by another transceiver and sector antenna.... more »
A73523
16
The 5G-17S model is a sector antenna of TechnoLogic series. Thanks to special construction the antenna radiates the beam with vertical polarization typical for sector antennas. The antenna can be used at base stations in areas with other wireless networks working simultaneously in 5 GHz band. Use of four sector antennas instead of a single omnidirectional device significantly reduces interferences coming from other networks.... more »
A73513
17
The 5G-23D model is a directional panel antenna of TechnoLogic series, working in 5 GHz band. The included bracket allows to mount the antenna with horizontal, vertical or other polarization. The antenna has been designed for use at client stations and for point-to-point links.... more »
A73502
18
The 5G-19D model is a directional panel antenna for 5 GHz band from TechnoLogic series. The antenna has been put into larger housing that can house another device. This model is suitable for mounting e.g. the RouterBoard 133/411 or ALIX3C1 board. The device can be installed after unscrewing the rear panel. The antenna has been equipped with uFL connector allowing to connect a miniPCI card without any adapter, which improves energetic efficiency.... more »
A73551
19
90cm light high-gain satellite dish providing reliable reception in bad weather conditions or in regions with lower signal level. ... more »
A9601
20
25-element UHF antenna (ch. 41-60) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences.... more »
A8820
21
21-element UHF antenna (ch. 38-69) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8812
22
19-element UHF antenna (ch. 36-40) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8795
23
19-element UHF antenna (ch. 27-39) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences.... more »
A8775
24
21-element UHF antenna (ch. 24-49) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8760
25
Antenna with built-in balun impedance transformer and 10-meter cable with SMA plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
A7017
26
60cm dish designed to receive signal from one of the popular satellites: Astra, HotBird, Sirius, Amos. This model can also be used as the dish (reflector) in do-it-yourself antennas for 2.4 GHz band (WiFi/WLAN).... more »
A9602
27
70cm dish designed to receive signal from one of the popular satellites: Astra, HotBird, Sirius, Amos.... more »
A9604
29
90cm high-gain satellite dish providing reliable reception in bad weather conditions or in regions with lower signal level. ... more »
A9605
30
110cm high-gain satellite dish providing reliable reception in very bad weather conditions or in regions with lower signal level. ... more »
A9658
31
100cm light high-gain satellite dish providing reliable reception in very bad weather conditions or in regions with lower signal level. ... more »
A9662
32
The directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band. It is a perfect tool for solving the frequent problem that our comfortable place is not the best one for using the laptop with UMTS card or simply the UMTS mobile. The problem of unstable signal will be overcome by...... more »
A7035
33
This directional antenna is designed to use in client stations, especially located at longer distances from the base station. It may be also employed for establishing point-to-point links.... more »
A73611
34
21-element UHF antenna (ch. 24-35) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8755
35
21-element UHF antenna (ch. 21-60) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences.... more »
A8745
36
16-element UHF antenna (ch. 21-60) designed mainly for MATV systems, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and directional characteristics that decrease the impact of interferences.... more »
A8740
37
Professional 3-element FM antenna (88-108 MHz) designed mainly for MATV installations or for receiving FM signals from distant stations. Recommended to professional installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got directional and band characteristics that decrease the influence of interferences...... more »
A8515
38
This 9-element professional FM antenna (88-108 MHz) is designed mainly for MATV installations or for receiving FM signals from distant stations, and works under most difficult conditions of radio reception. We recommend it particularly to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals...... more »
A8530
39
6-element VHF-I antenna (ch. 2-4), packed in foil. Aluminum parts, electro-galvanized steel structural components. ... more »
A8603
40
12-element VHF antenna (ch. 6-7) designed mainly for MATV systems, capable of working in difficult reception conditions. We particularly recommend it to all professional antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got directional and band-pass characteristics that decrease impact of interferences. ... more »
A8630
41
12-element VHF antenna (ch. 7-8) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got channel and directional characteristics that decrease the impact of interferences.... more »
A8650
42
5-element VHF antenna (ch. 9-11) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got channel and directional characteristics that decrease the impact of interferences. ... more »
A8660
44
12-element TV antenna for channel 10, designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got channel and directional characteristics that decrease the impact of interferences. ... more »
A8670
45
12-element VHF antenna (ch. 11-12) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got channel and directional characteristics that decrease the impact of interferences. ... more »
A8675
46
21-element UHF antenna (ch. 21-26) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8680
47
27-element UHF antenna (ch. 21-35) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directional characteristics that decrease the impact of interferences. ... more »
A8700
48
13-element UHF antenna (ch. 21-39) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and directional characteristics that decrease the impact of interferences. ... more »
A8705
49
25-element UHF antenna (ch. 21-40) designed mainly for MATV systems, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got band and strongly directiona characteristics that decrease the impact of interferences.... more »
A8725
50
21-element UHF antenna (ch. 21-45) designed mainly for MATV systems, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got directional and band characteristics that decrease the impact of interferences. ... more »
A8730
51
8-element UHF antenna (ch. 21-60) designed mainly for MATV installations, capable of working under difficult reception conditions. We can recommend it especially to all antenna installers. Its mechanical construction is strengthened and the influence of the mast doesn't disturb proper reception of signals. It has got directional and band characteristics that decrease the impact of interferences.... more »
A8735
53
The DA Signal antenna is designed for indoor operation and dedicated for reception of terrestrial digital broadcasts. The device has very good RF parameters due to employing high class low noise amplifier. The antenna is suitable for receiving signals with vertical and horizontal polarization.... more »
A6030
54
Antenna with built-in balun impedance transformer and 10-meter cable with SMA plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
A7027
55
The panel antenna ATK P4/5.5 GHz is a multi-element microstrip device designed for use in wireless networks. It is advised to employ it in client stations, at distances up to several kilometers from base station, and it may also be used in small base stations. The antenna is also suitable for creating point-to-point links.... more »
A739015
56
The panel antenna ATK-P8/5 is a multi-element microstrip device designed for use in wireless networks. It is advised to employ it in client stations, at distances up to several kilometers from the base station, and it may also be used in small base stations. The antenna is also suitable for creating point-to-point links being the backbone of WLAN, at distances from 2 to 5 km. The frontal part of housing is made of UV-proof ABS plastic that is also resistant to weather conditions, including heavy rain (absolute watertightness).... more »
A739025
57
80cm dish designed for reception of satellite broadcasts from one or two (close) satellite positions (using double mount). Very good solution for many locations in Europe (especially Central Europe), providing reliable reception from Astra and/or Hotbird. The dish is suitable for mounting Monoblock converters.... more »
A9650
58
This omnidirectional antenna is intended for use at client stations. It has decent energetic gain equal to 5dBi within whole working band (2.4 GHz - 2.5 GHz).... more »
A72713
59
Sector antenna designed for WLAN base stations operating in 5GHz band. It is microstrip construction, with vertical polarization. Its housing ensures very good protection against adverse weather conditions.... more »
A73223
60
ANT-57-GD22 operates in 5GHz band. It has been designed for client stations. Due to ribbed structure it is insensitive to gusts of wind. High gain of the antenna allows to use it at long distances from base stations. It can work with horizontal or vertical polarization.... more »
A73306
61
The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity.... more »
A7040
62
Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission. ... more »
A7044
63
The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity. The antenna is equipped with integrated 5 m RF cable, terminated with SMA plug.... more »
A7041
64
Panel antenna BOX-8 is designed for client stations located near the base station.... more »
A72225
65
Omnidirectional antenna to be used at client stations, with decent gain (1.8dBi) in whole working band (2.4GHz - 2.5GHz).... more »
A72712
66
Directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band.... more »
A7036
67
80cm dish for receiving programs from one or two close satellites (with two LNBs on a double mount). The dish is characterized by stable construction that enables the user to get perfect reception of satellite broadcasts. Another advantage of the dish is quick assemblage. It is the optimum dish in most European countries for receiving satellite programs and platforms from Astra and Hotbird.... more »
A9653
68
High-quality TV/satellite coax (A-class, 18.1dB/100m at 862 MHz) in PE sheath, gel-filled. For outdoor applications.... more »
E1017_500
69
The amplifier has been designed for use in small antenna installations/MATV systems where there is a need of distributing return signals, e.g. from sat receivers, CCTV cameras etc. ... more »
B11585
70
Antenna with built-in balun. Elements screwed down to the carrier.... more »
A7005
71
Broadband antenna (ch. 6-69), packed in foil. Aluminum parts, electro-galvanized steel structural components. The set includes shielded RF amplifier and AC/DC adapter with RF/DC separator allowing to provide power to the amplifier with the same cable which sends the signal from the antenna to the receiver.... more »
A0034
72
The panel antenna ATK-P4/5 is multi-element microstrip device designed for use in professional wireless networks. The applications include client stations within 1-4 km distance from base station, small base stations and point-to-point links (up to several kilometers) used for creating WLAN backbone. The front part of the antenna case is made of durable ABS plastic resistant to UV radiation and adverse weather conditions, The whole housing is watertight. ... more »
A73901
73
Directional antenna for client stations, with relatively high gain (23 dBi) within whole, broad (5100 - 5900 MHz) working band. The distinctive feature of the TetraAnt antenna is low level of side lobs. The antenna is integrated into compact casing, with a mount allowing to adjust its tilt +/- 15 deg....