My Cart is empty


Antenna /IEC

Antenna Socket (IEC): Cabelcon (RG-6/Triset-113, "Self-Install")
Code: E3003
Price w/o taxPriceDisc.Validity  
0.83 EUR0.83 EUR0 %
Antenna Socket (IEC): Cabelcon (RG-6/Triset-113,
Front view
Antenna Socket (IEC): Cabelcon (RG-6/Triset-113,
Rear view
The E3003 antenna socket from Cabelcon, Denmark, is intended for applications in home antenna systems. The patented design, based on "Self-Install" concept, ensures professional, durable connection. What is important, no compression tool is needed.
Installation instructions
Installation steps: preparing the cable end, sliding the plastic cap onto the cable, inserting the socket body so that the sleeve enters under the braid, screwing the cap onto the threaded body. All the operations take no more than 15 seconds.
The connector installed properly is fully integrated with the cable, however the socket is reusable - the cap can be unscrewed and the plug pulled off. It may be useful, for example, when the antenna cable must be shortened or replaced.
The cable can be quickly prepared for the installation with the use of one of the tools, E8010 or E8011 (the latter is also a wrench for tightening F connectors).
Distinguishing features
  • class A screening effectiveness,
  • 3 GHz band,
  • no need for a compression tool,
  • reusable,
  • high quality and reliability,
  • connection stability,
  • designed for cables with dielectric diameter of 4.9-5.1 mm.
The connector is compatible with the following cables:
NameCabelcon IEC socket
Bandwidth [MHz]up to 3000
Characteristic impedance [Ω]75
Screening efficiency (30-1000 MHz) [dB]115
Transfer impedance (5-30 MHz) [mΩ/m]5.0
Return loss (0.3-1750 MHz) [dB]20
Return loss (1750-3000 MHz) [dB]19
IMD3 (@ 2 x 100 mW) [dBc]-135
IMD (IP3) [dBm]+87
Tensile strength (overall) [N]147
Price w/o taxPriceDisc.Validity  
0.83 EUR0.83 EUR0 %
Antenna Socket (IEC): Cabelcon (RG-6/Triset-113, "Self-Install")
Code: E3003