| No. | Name | Code |
1 |
|
|
|
|
| Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.... more »
|
|
|
| A7046 |
2 |
|
|
|
|
| Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.... more »
|
|
|
| A7045 |
3 |
|
|
|
|
| The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity. The antenna is equipped with integrated 5m RF cable, terminated with SMA/RP plug.... more »
|
|
|
| A7042 |
4 |
|
|
|
|
| The directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band. It is a perfect tool for solving the frequent problem that our comfortable place is not the best one for using the laptop with UMTS card or simply the UMTS mobile. The problem of unstable signal will be overcome by attaching the antenna allowing comfortable work (or entertainment!).... more »
|
|
|
| A7037 |
5 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10-meter cable with SMA R/P connector. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7029 |
6 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10-meter cable with SMA R/P plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7019 |
7 |
|
|
|
|
| Directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band.... more »
|
|
|
| A7036 |
8 |
|
|
|
|
| The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity. The antenna is equipped with integrated 5 m RF cable, terminated with SMA plug.... more »
|
|
|
| A7041 |
9 |
|
|
|
|
| Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.
... more »
|
|
|
| A7044 |
10 |
|
|
|
|
| The ATK-LOG antenna has been designed for use in GSM/DCS/UMTS/HSDPA systems working in 800-2170 MHz range. It effectively solves the typical problem of inadequate signal in the place where we want to use our laptop with GSM/UMTS card or simply our mobile phone. The antenna will allow us to forget about the problem, providing good connectivity.... more »
|
|
|
| A7040 |
11 |
|
|
|
|
| Omnidirectional outdoor antenna with magnetic base "Trident". The antenna has been designed for cooperation with modems, gates and GSM/DCS phones working in GSM 900 and DCS 1800 bands. It ensures 3 dBi gain. Such antenna eliminates the typical problem of inadequate signal in the place where we want to use the terminal. This small device allows for proper operation, ensuring sufficient signal level.... more »
|
|
|
| A7048 |
12 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10-meter cable with SMA plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7027 |
13 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10-meter cable with SMA plug. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7017 |
14 |
|
|
|
|
| The directional antenna ATK-16/2GHz has been designed for use in UMTS systems, working in 1.9-2.1 GHz band. It is a perfect tool for solving the frequent problem that our comfortable place is not the best one for using the laptop with UMTS card or simply the UMTS mobile. The problem of unstable signal will be overcome by...... more »
|
|
|
| A7035 |
15 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10-meter cable with FME connector. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7026 |
16 | | A7025 |
17 |
|
|
|
|
| Antenna with built-in balun impedance transformer and 10m coxial cable with FME socket. Elements screwed down to the carrier. Simple installation (adding the reflector) takes about one minute.... more »
|
|
|
| A7016 |
18 | | A7015 |
