View of the amplifier

Top view

The view after removing the cover

The RF amplifier AWS-1036 has been designed for applications in individual and community antenna installations. The device has been equipped with one input (which may require to employ an antenna diplexer to combine the received channels), and four outputs with independent level controls. It is especially suitable for signal distribution in community (MATV) and CATV systems (due to whole TV band).
The independent level controls allow equalize signals in outlets (or branches) in the case of different distances (compensation of attenuation of the cables).

The set also includes regulated AC/DC adapter (output: 12V/250mA, Jack: 3.5 mm), but it is possible to power the amplifier through its "D" output, via coaxial cable, using RF/DC separator - AZS-03 C0397 (and the included power supply). It allows to mount the amplifier in the attic and power it from the place with access to the power line. When using a splitter, in this case it has to pass DC voltage, e.g. E2094.

AWS-103x amplifiers are equipped with solid, cast metal housing, which protects them against external interferences.
The amplifiers are not prepared for operation in open space or wet places.

 

Name	Broadband amplifier AWS-1036
Code	B11587
Number of inputs / outputs		1/4
Frequency range	MHz	47-862
Amplification (increasing with freq.)	dB	20/23 +/-2
Max. output level (two TV channels)	dB	100
IMA3 60 dB	dB	94
Noise figure	dB	5 +/-1
Return loss	dB	≥10
Amplif. adjustment range VHF/UHF	dB	0...14 +/-1
DC supply voltage	V	12 +/-5%
Current consumption	mA	165 +/-5%
Input/output impedance (F)	Ω	75
Operating temperature	oC	-25...55