View of the set

View of the set - the opposite side

The master and remote part (terminator) after separation

The included case

View of the packaging

The tester helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for 50 ohm coaxial cables terminated with BNC plugs.
The set consists of two parts - the master and remote part (terminator) - that are used at the opposite ends of the tested cable. After plugging in the RJ-45 connectors of the cable to the adequate sockets of the main device and the terminator, and switching on the test, every pair is tested separately (there are two speeds available). In the case of FTP cable the testing also includes proper connection of the screen. The results are shown by glowing LEDs.

The tester consists of two parts:

• main part equipped with switch, LEDs, RJ45 and BNC sockets
• auxiliary part (terminator) equipped with LEDs, RJ45 and BNC sockets

Battery is not included.

Name	WT-4053
Code	N7050
Tests	Detection of: - incorrect connections - short circuits - breaks
Kinds of tested cables	UTP, FTP, Tri-Lan 240 50 Ω
Connectors	RJ45, BNC
Power	9V battery (6F22)
Contents	Master and remote part, case