My Cart is empty

LAN Accessories


Cable Tester (RJ-45, RJ-11)
Code: N7055
Price w/o taxPriceDisc.Validity  
6.02 EUR6.02 EUR0 %
Cable Tester (RJ-45, RJ-11)
View of the set
Cable Tester (RJ-45, RJ-11)
View of the set - the opposite side
Cable Tester (RJ-45, RJ-11)
The master and remote part (terminator) after separation
Cable Tester (RJ-45, RJ-11)
The included case
The tester helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
The set consists of two parts - the master and remote part (terminator) - that are used at the opposite ends of the tested cable. The FUNC button allows to choose one of two available modes. After plugging in the RJ-45 connectors of the cable to the adequate sockets of the main device and the terminator, and switching on the test, every wire is tested separately. In the case of FTP cable the testing also includes proper connection of the screen. The second mode (manual) is triggered by pressing and holding the FUNC button for about 2 seconds. To test next wire one has to press each time the FUNC key (for a short time). The results are shown by glowing LEDs.
The tester consists of two parts:
  • main part equipped with switch, LEDs, RJ45 and R11 sockets
  • auxiliary part (terminator) equipped with LEDs, RJ45 and RJ11 sockets
Battery is not included.


LAN Tester NS-468AT




Detection of:

- incorrect connections
- short circuits
- breaks

Kinds of tested cables

UTP, FTP, telephone cables

Connectors RJ45, RJ11


9V battery


Master and remote part, case

Price w/o taxPriceDisc.Validity  
6.02 EUR6.02 EUR0 %
Cable Tester (RJ-45, RJ-11)
Code: N7055