Twisted-pair
UTP - indoor
CAT 5e UTP Cable: NETSET UTP 5e [1m], indoor
Code: E1408_1
Price
Disc.
Quantity
0.36 EUR
0 %
NETSET BOX UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables.
![CAT 5e UTP Cable: NETSET BOX [305m], indoor](http://images.dipol.com.pl/pict/e1408_305+++.jpg)
Close-up
NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
NETSET cable is the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- parameters far exceeding the requirements for Category 5+ twisted pair cables
- preliminary quality control of materials and thorough tests of the final product,
- meter markers - length error less than 0.5%,
- solid wires of 0.50 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 1.8 mm diameter,
- pairs twisted together, outer diameter of 4.0 mm,
- sheath made of gray PVC (RAL 7032), of 5.0 mm diameter.
NETSET UTP cat 5e E1408 LAN cable is manufactured in compliance with:
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 standards.
IEC 61156-6 (2000), ISO/IEC 11801 (2000), ANSI/TIA/EIA-568-A (1995), EN 50173 (1999), yd/t1019-2001 standards.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
The NETSET UTP cat 5e E1408 cable can be used in a wide temperature range: -20...+70 oC, and installed between 0 and +50 oC. Minimum bending radius factor (radius to diameter ratio) is 8.
Specifications
| Name | NETSET UTP 5e |
| Code | E1408 |
| Structure | |
| Wires | solid copper conductors Ø 0.50 mm (24 AWG) |
| Wire insulation | PE |
| Sheath | PVC (gray, RAL 7032) |
| Outer diameter [mm] | 5.0 ±0.3 |
| Copper content [kg/km] | 14.9 |
| Weight [kg/km] | 28.5 |
| Electrical parameters | |
| Wave impedance [Ω] | 100 ±15 |
| Capacitance of any transmission path at 1kHz [nF/km] | 50 ±1 |
| Nominal Velocity of Propagation (NVP) [%] | 67 |
| Resistance of any transmission path [Ω/km] | ≤ 188 |
| Asymmetry in capacitance of transmission paths to the ground [pF/km] | ≤ 1600 |
| Insulation resistance [MΩ/km] | > 500 |
| Installation and operation | |
| Operating temperature range [oC] | -20...+70 |
| Operating humidity range [%] | 0...100 |
| Installation temperature range [oC] | 0...+50 |
| Minimum bending radius [radius to diameter ratio] | >8 |
NETSET BOX UTP CAT 5e cable has been tested by
Central Testing Laboratory
of the
National Institute of Telecommunications in Warsaw, Poland
and got
CERTIFICATE OF THE INSTITUTE
The certificate of the National Institute of Telecommunications for the NETSET UTP CAT5e cable is available here.
The results of the measurements of the NETSET UTP CAT 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
- Pair resistance testing.
| Pair | Wire | Wire resistance [Ω/km] | Resistance asymmetry [%] | |
| UTP cat 5e | 1 | a | 93.6 | 0.2 |
| b | 93.8 | |||
| 2 | a | 91.7 | 0.4 | |
| b | 91.3 | |||
| 3 | a | 91.8 | 0.1 | |
| b | 91.7 | |||
| 4 | a | 92.3 | 0.1 | |
| b | 92.2 | |||
| Required | - | - | ≤150 | ≤3.0 |
- Capacitance testing.
| Pair | Effective capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
| UTP cat 5e | 1 | 49.55 | 217 |
| 2 | 48.19 | 26 | |
| 3 | 49.32 | 88 | |
| 4 | 47.28 | 229 | |
| Required | - | ≤55 | ≤1600 |
- Insulation testing.
| Pair | Wire | Insulation resistance [MΩ/km] | |
| UTP cat 5e | 1 | a | 3.0 · 105 |
| b | 2.8 · 105 | ||
| 2 | a | 7.6 · 105 | |
| b | 7.7 · 105 | ||
| 3 | a | 5.4 · 105 | |
| b | 5,1 · 105 | ||
| 4 | a | 7.7 · 105 | |
| b | 7.0 · 104 | ||
| Required | - | - | ≥150 |
- Tests of electric strength of insulation.
| Test method | Test voltage [VAC] | |
| Applied (passed) | Required | |
| Voltage applied between connected in parallel all a wires and all b wires | 1000 | 1000 |
- End-to-end attenuation testing.
| Pair | Effective attenuation [dB] | |
| UTP cat 5e | 1 | 23.6 |
| 2 | 24 | |
| 3 | 23.8 | |
| 4 | 24.2 | |
| Required | - | ≤24.2 |
- Near End Cross Talk (NEXT) testing.
| Pair to pair | NEXT [dB] | |
| UTP cat 5e | 1-2 | 42.3 |
| 1-3 | 39.8 | |
| 1-4 | 44.1 | |
| 2-3 | 36.7 | |
| 2-4 | 38.8 | |
| 3-4 | 39.4 | |
| Required | - | ≥34.0 |
- Return loss testing.
| Pair | Return loss [dB] | |
| UTP cat 5e | 1 | 22.7 |
| 2 | 29.1 | |
| 3 | 25.3 | |
| 4 | 22.1 | |
| Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
| Pair | PS-NEXT [dB] | |
| UTP cat 5e | 1 | 36.94 |
| 2 | 33.93 | |
| 3 | 33.63 | |
| 4 | 35.44 | |
| Required | - | ≥31.0 |
Transmission parameters
The parameters show that NETSET UTP 5e E1408 fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 1m
Price
Disc.
Quantity
0.36 EUR
0 %
COMPLETE WITH
![8-pin Modular Plug (on solid wire) [1pc.]](pict.main/j2008_.gif)
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Most of WLAN devices are equipped with SMA-RP connectors, whilst outdoor antennas are equipped with N-type connectors. Using H-155 cable, it is needed to end it with SMA... more »