MY CART
My Cart is empty

Discontinued items

Color CCTV Camera: u-cam 442- CLEARANCE SALE!
Code: M11223
Withdrawn from the offer
u-cam 442 is a high quality color CCTV camera with parameters configurable by OSD menu.
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the control buttons
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the rear panel

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The included accessories

Distinguishing features:
  • SONY Super HAD CCD II sensor
  • 450 TVL
  • OSD menu
  • 4 privacy zones
  • 64 motion detection zones
The u-cam 442 camera uses the highest-quality 1/3'' CCD Super HAD II from SONY, which is an improved version of the SONY CCD Super HAD sensor. SONY Super HAD II sensor is characterized by a considerable improvement in image quality over its predecessor. It is mainly better color and brightness reproduction of the scene in low-light conditions. Below there are images from cameras with the two types of the sensors.
Comparison of images from two cameras: on the left - CCTV camera equipped with CCD SONY Super HAD; on the right - CCTV camera with CCD SONY Super HAD II. Source: http://www.sony.net
By using a very good SONY sensor and with the possibility of setting image parameters in the camera MENU, the images are of the highest quality. The camera produces a natural-color rendition of the original scene and, thanks to a good resolution of the video (450 TVL), it is possible to distinguish fine details. Due to high sensitivity (0.1 lx), the camera can successfully operate in low-light conditions, providing color images without visible noise.
The camera has been specially developed for daylight, from dawn till dusk, as well as for night operation in the visible light. It is not recommended for cooperation with IR illuminators. Both with natural and artificial lighting, the camera ensures very good image quality, with sharp edges and natural colors. Increased sensitivity can be achieved by switching the camera to black and white mode.
The camera cooperates with C/CS lenses, and supports both DC and Video auto iris. The camera has the ability to adjust focus by setting the precise distance from the sensor to the lens. If the camera should operate with an IR illuminator (not recommended), the lens has to provide IR correction - the image will be sharp during the day and at night.

Some JENSEN lenses suitable for the camera:
  • M21401 - JENSEN 3.0 - 8.0 mm DC F1.0
  • M2136 - JENSEN 2.8 - 12 mm DC F1.4 with IR correction
The camera has an OSD menu enabling the user to precisely adjust image parameters to the lighting conditions in which the camera works. The menu allows to configure, among others, the following parameters/modes:
  • BLC,
  • AGC,
  • WHITE BAL.,
  • MOTION DETECTION,
  • PRIVACY - privacy zones.
Specifications:
Nameu-cam 442
CodeM11223
Image sensor
1/3'' CCD Sony Super HAD II
Resolution500x582 pixels
Sensitivity0.1 lx / F1.2
S/N ratio
>60dB
Video resolution
450 TVL
Adjustment and controlOSD MENU
Privacy zones4
Motion detection zones64
Gamma correction
0.05 - 1
Scanninginterlaced
White balance
ATW/AWB/Fixed/Manual
BLC12 zones
Electronic shutter
Auto/FLK/Fixed/Manual
Mirror functionyes
Synchronization
internal
Operating temperature range
-10 ... 50 oC
Lens mountC/CS
Power12VDC/120mA
Withdrawn from the offer
 
Color CCTV Camera: u-cam 442- CLEARANCE SALE!
Code: M11223