View of the meter in its rubber casing

View of the meter without the casing

Back view - visible eight AA rechargeable batteries

Other included accessories: AC/DC adapter (charger), car charger, cable for connecting to a PC

The included lanyard and CD-ROM with software

The Satlook Lite R10710 meter has been designed and manufactured by engineers of Emitor company in Sweden. This company has many years' experience in the production of measuring devices for terrestrial and satellite television systems.

The device has been designed to assist the antenna installer in accurate alignment of satellite dishes. The features of the meter and a reasonable price make the device a perfect choice. It measures parameters such as SNR and BER, which are decisive in ensuring reception quality of every satellite system.

The advantages of Satlook Lite R10710 include the speed of reaction - the meter immediately reacts to the movement of the dish or LNB. With EasyFind function the installer can select one of pre-programmed satellite positions to quickly setup the satellite dish in the right direction.

The device can be used both by professional antenna installers and by amateurs who do the job occasionally. Its advantage is very simple operation, controlled only by three buttons. The most important functions are easily accessible, a skilled installer can learn to use the meter within minutes.

Satlook Lite is equipped with a backlit LCD display. It presents various types of information such as satellite id, digital transmission parameters , signal spectrum.

Support for Network Information Table (NIT) allows the identification of services located on each transponder (TV and radio channels) - the installer knows that the chosen transponder is the right one.

The built-in loudspeaker makes it easy to provisionally find the proper position of the dish "by ear" (beep tone corresponds with the satellite signal strength). Satlook Lite can control devices such as LNBs, multiswitches, positioners compatible with DiSEqC.

The device is powered by eight AA rechargeable batteries, which is very practical. The operating time with fully charged batteries depends on the functions used but is not shorter than 1 hour. In the case of a particularly difficult, time-consuming installation, the meter can be powered by standard alkaline batteries (8x AA 1.5 V). The weight of the meter with batteries is less than 1kg, which will be appreciated by installers performing installations in difficult conditions.