View of the meter in its rubber casing

Front view

Back view - visible eight AA rechargeable batteries

Other included accessories: AC/DC adapter (charger), car charger, cable for connecting to a PC

The DigiAir Pro CATV R10610 meter has been designed and manufactured by engineers of Emitor company in Sweden. This company has many years experience in the production of measuring devices for terrestrial and satellite television systems.

The meter is dedicated for signal measurements in digital cable networks based on DVB-C standard. The main features of the device include high speed, low weight (0.7 kg without batteries), and convenience. An important advantage is the ease of use - the measurements of the signals are made in a really intuitive way. A skilled installer needs a few minutes to make use of the basic functions.

The meter is equipped with replaceable F-type measurement connector.

The display during a measurement. The measuring time is 9 seconds.

DigiAir CATV is equipped with a backlit LCD display so the measurements can be performed even in adverse lighting conditions (the light is switchable). The display can show various screens of information such as QAM modulation scheme, digital transmission parameters, or television signal spectrum.

The measurement range is 30-120 dBuV.

Thanks to a built-in speaker, the signal level may be represented by beep (higher tone = better signal).

The device is powered by eight AA rechargeable batteries, which is very practical. The operating time with fully charged batteries depends on the functions used but is not shorter than 1 hour. In the case of a particularly difficult, time-consuming installation, the meter can be powered by standard alkaline batteries (8x AA 1.5 V). Auto-off function enables the user to set the idle period after which the device switches off. The weight of the meter with batteries is less than 1kg, which will be appreciated by installers performing installations in difficult conditions.