Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)

Code: L10222
This product is no longer available
Estore: Library:

Support

Details

Ethernet media converter TP-LINK MC100CM allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable into modulated light signal transmitted via multimode fiber cable.
Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)
General view
Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)
Front view
Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)
Rear view
Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)
The included AC/DC adapter
Ethernet Media Converter: TP-LINK MC100CM (multimode, 100Mb/s, SC, 2km)
View of the packaging
Distinguishing features:
  • 1 x Ethernet port 10/100 Mbps (RJ-45)
  • maximum transmission distance - 2 km
  • transmission via two multimode fibers
  • LED indicators showing operating status
  • easy installation (plug and play)
  • power supply included
Media converter TP-LINK M100CM is a reliable device allowing to transmit Fast Ethernet signals through two multimode optical fibers over distances up to 2 km. It is equipped with two SC connectors, one for transmitting the signal (TX), second for receiving it (RX). The optical signals are transmitted and received in the second transmission window (1310 nm).
TP-LINK devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
TP-LINK media converters are fully compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3x standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status.

Specifications:
Name Ethernet media converter TP-LINK MC100CM
Code
L10222
Standards
IEE 802.3,  IEEE 802.3u, IEE 802.3x
Transmission mode
Full Duplex Flow Control
Interfaces 1x100BASE-T  UTP 5, 5e (max. 100 m)
EIA/TIA-568 100 Ω (max. 100 m)
2x100BASE-FX Multimode
LED indicators
PWR, LINK, RX
Certificates
FCC, CE
Transmission window [nm] 1310
Range [km] 2
Power 230 VAC /9 VDC
Dimensions [mm] 94.5x73x27
Operating temperature [º] 0-40

 

NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions
TP-LINK media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. TP-LINK Ethernet media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of that converters.
Ethernet Media Converter ULTIMODE M-023M (two multimode fibers up to 2 km)
Example application of TP-LINK media converter

Specifications

Nazwa Media konwerter TP-LINK MC100CM
Kod L10222
Standardy IEE 802.3,  IEEE 802.3u, IEE 802.3x
Podstawowe  funkcje Full Duplex Flow Control
Interfejsy 1x100BASE-T  UTP 5, 5e (max. 100m)
EIA/TIA-568 100Ω (max. 100m)
2x100BASE-FX Wielomodowy
Diody LED PWR, LINK, RX
Certyfikaty FCC, CE
Okno transmisyjne [nm] 1310
Maksymalny zasięg [km] 2
Zasilanie 230 V AC/9 V DC
Wymiary [mm] 94,5x73x27
Temperatura pracy [º] 0-40