MY CART
My Cart is empty

Media Converters

ULTIMODE

Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)
Code: L11041
Price w/o taxPriceDisc.Validity  
34.96 EUR34.96 EUR0 %
Ethernet media converter ULTIMODE M-403M allows to change electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via single-mode fiber cable.
Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)
View of the ULTIMODE M-403M converter and power supply
Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)
View of the front panel
Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)
View of the rear panel
Distinguishing features:
  • 1 x Ethernet port 10/100 Mbps (RJ-45)
  • maximum transmission distance - 40 km
  • transmission via two single-mode fibers
  • LED indicators showing operating status
  • easy installation (plug and play)
  • power supply included
ULTIMODE M-403M is reliable media converter enabling the transmission of Fast Ethernet data in two single-mode optical fibers at distances up to 40 km. The media converter has two SC connectors used to transmit (Tx) or receive (Rx) the signal. Optical signal is transmitted and received in the second transmission window of 1310 nm.
ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
Sensitivity of the receiver and output power of the transmitter is adapted to transmit information up to 40 km. In the case of shorter distances (up to 4 km), it is required to use additional 2dB attenuators by the receivers. They will protect them against "burning".
ULTIMODE media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100.000 hours (more than 11 years).
Specifications:

 Name: ULTIMODE M-403M
 Code: L11041
 Standards: IEEE 802.3u. IEEE 802.3u
LAN port: 802.3 (10Base-TX). 802.3u (100Base-TX/FX)
 RJ-45 UTP/STP cat. 3. 4. 5. max 100m
 Optical port:Single-mode optical fiber (8.3/125μm. 8.7/125μm. 9/125μm. 10/125μm)
 Max 40 km
 Wavelength (Tx): 1310 nm
 Wavelength (Rx): 1310 nm
 Optical connectors: 2xSC
 Tx power: -8...-3 dBm
 Rx sensitivity: > -34dBm
 Transmission speed: 10/100 Mb/s
 Power: DC 5V/ 2A
 Operating temperature range: 0 ... 50 oC

NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
  • possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200km - without regeneration)
  • high-volume information transfer via single fiber
  • resistance to electromagnetic interference
  • resistance to weather conditions (humidity, electrostatic discharges and others)
  • no tapping possibility
  • low weight and small dimensions
ULTIMODE media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. Media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of ULTIMODE converters.
Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)Switch TP-Link TL-SF1008D (8 ports)
Example application of ULTIMODE media converter

The devices are designed for indoor operation. The ULTIMODE series includes a number of types:
  • with two multimode fibers - transmission up to 2km - M-023M L10021
  • with one single-mode (WDM) fiber - transmission up to 20km - M-207M L11521, M-207G L11525 and transmission up to 40km - M-407M L11541
List of parameters of ULTIMODE media converter series
Name:M-023MM-403MM-207MM-407MM-207G
Code:L10021L11041L11521L11541L11525
Supported standards:IEEE 802.3, IEEE 802.3u
Transmission speed:10/100 Mbps10/100/1000 Mbps
Optical connectors:2xSCSC
Range [km]: 240204020
Wavelength
Tx/Rx [nm]:
1310/13101310/1550, 1550/1310
Ethernet port:RJ-45
Power:DC 5V/2ADC 5V/2ADC 5V/2ADC 5V/2ADC 5V/2A

Price w/o taxPriceDisc.Validity  
34.96 EUR34.96 EUR0 %
 
Ethernet Media Converter ULTIMODE M-403M (two single-mode fibers up to 40 km)
Code: L11041
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE