No.
Fiber Optics
Name
Date
1
How to terminate fiber with ULTIMODE FAST connectors
ULTIMODE FAST quick assembly connectors allow fiber termination with SC connectors without time-consuming gluing and polishing. The procedure does no require "sterile" conditions, because the end face of the built-in fiber fragment has been glued and polished by the manufacturer. The low loss at the level of 0.25 dB is obtained thanks to advanced positioning of the inserted fiber end by V-shaped grooves. The optical gel that is also used in the connectors reduces the effects of an imprecise cut and a possible gap between the end faces of the fibers.
2011-12-13
2
Multimode and single mode fiber-optic cables
One of the basic criteria of optical equipment classification is the type of the fiber optics with which it works. It is connected with the type of transmission of light in the fiber core - single-mode or multimode. Transmission of light in optical fibers is based on the phenomenon of total internal reflection. The core, usually made of doped glass, is the center through which light travels along, while the fiber cladding is made of pure glass. Such combination of materials is dictated by their refraction indexes. To achieve total internal reflection, the refraction index of the cladding ...
2010-08-02
3
ULTIMODE Home System - applications and diagrams
ULTIMODE Home System is a solution for subscriber networks in homes and offices, based on polymer optical fibers (POF - Plastic Optical Fiber). A complete range of devices enables every subscriber to get access to high quality network services such as broadband Internet, video streaming, VOD, video conferencing. The solutions based on plastic optical fibers are much more flexible, can be successfully installed and reconfigured by the end users. In addition, the wavelength at which the systems operate is within the spectrum of visible light, 650 nm, which enables easy control of the ...
2012-01-05
4
Optical power budget in a fiber-optic communication link
The most important task in the design of fiber optic link is to determine the maximum range of the optical transmission path, being in fact the balance of optical power in the link. Balance of power is a comparison of the power at the input of the optical link with the losses in fiber optic cables and other path components. This will help to find the optimal parameters of transmitting and receiving devices to ensure proper signal transmission.
2010-01-10
5
ULTIMODE Home System - description, advantages, installation
ULTIMODE Home System is a breakthrough solution allowing for easy creation of optical fiber home networks (FITH - Fiber In The Home). The ease and safety of installation makes the benefits of fiber optics available to everyone.
2011-10-25
6
CCTV over fiber - simple, cheap and reliable technology
Many installers believe that fiber optics is an expensive and difficult to implement solution and don't think about it as an alternative to copper cables. They avoid to use fiber optics even in situations where application of this transmission medium seems obvious.
Sometimes the investor leaves no choice - as in the case of the installer who appeared in one of our branches, obligated to install a 350-meter-long fiber optic link. After selecting the appropriate converters, we prepared the suitable optical cable with connectors. The final installation (except laying the cable) took about 5 ...
2011-11-10
7
Mechanical splicing of optical fibers - ULTIMODE FAST-MS1
Mechanical splices ULTIMODE FAST-MS1 are used for permanent connections of optical fibers without the need of employing fusion splicers. Low loss at the level of 0.1 dB is obtained thanks to advanced positioning of the fiber end faces by V-shaped grooves.
0011-10-25
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Although the system has been developed for one-family houses and small buildings, it is compliant with the latest Regulation of the Minister of Infrastructure in Poland... more »