Video converters
19-inch RACK
Fiber Optic Video Converter ULTIMODE V-216D (single-mode, WDM, 16x video, 1x data, RACK 19'')
Code: L2921
Price
Disc.
Quantity
688.90 EUR
0 %
Fiber optic video converter ULTIMODE V-216D L2921 enables transmission of 16 video channels and one telemetry data channel (RS-485) via one optic fiber, over a distance up to 20 km.
View of the ULTIMODE V-216D converter set
Rear view of one of the two pieces of the equipment
The included accessories
Distinguishing features:
- 16 video channels
- 1 one-way RS-485 data channel
- maximum transmission distance: 20 km
- transmission via one single-mode fiber (WDM)
- LED indicators showing operating status
- the set contains video transmitter and video receiver, 2 patchcords, 2 power cords
- very easy installation
The ULTIMODE V-216D video converter uses the latest optical technology which ensures transmission of 16 video channels and 1 one-way RS-485 data channel (in opposite direction - from the video receiver to the video transmitter) via a single optical fiber. It is possible due to the use of wavelength-division multiplexing technology (WDM) - different wavelengths carry different signals, over one strand of fiber, which significantly lowers installation costs. The equipment uses dedicated SFP WDM modules with LC connector. The L2921 set contains 2 devices - video transmitter marked "T" and video receiver marked "R". The devices are intended for placing in a 19" RACK cabinets.
One of the devices transmits optical signal in the III transmission window (1550 nm), whereas the second uses the II window (1310 nm). Sensitivity of the receiver and output power of the transmitter is adapted to transmit information up to 20 km. In the case of shorter distances (up to 2 km), it is required to use additional 2dB attenuators by the receivers. They will protect them against "burning". Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100000 hours (more than 11 years).
The set is compatible with NTSC/PAL/SECAM systems and ensures high quality transmission of live video over distances up to 20 km, much longer than those offered by standard devices. The possibility of sending control signal (RS-485) from the video receiver to the video transmitter allows to use PTZ cameras.
Specifications:
| Optical port | Connector: | LC | |
| Range: | 20 km | ||
| Operating wavelengths: | 1310/1550 nm | ||
| Transmitter: | Rx sensitivity (data): | -35dB ... -3dB | |
| Tx power (video): | -8dB ... -3dB | ||
| Receiver: | Rx sensitivity (video): | -22dB ... -3dB | |
| Tx power (data): | -15dB ... -5dB | ||
| Video signal | Number of channels: | 16 | |
| Connectors: | BNC | ||
| Standards: | NTSC/PAL/SECAM | ||
| Rated input level: | 1 Vpp, 75Ω | ||
| Video baseband: | 5...7.5 MHz | ||
| DG: | < 1% | ||
| DP: | < 1% | ||
| SNR: | > 70 dB | ||
| Data | Number of channels: | 1 | |
| Data rate: | 0 – 400 kb/s | ||
| BER: | < 10-9 | ||
| Interface: | RS-485 | ||
| Physical specs | Operating temperature: | -40...80 oC | |
| Dimensions: | 435 x 220 x 45 mm | ||
| Power: | 100-250 VAC, 50-60 Hz | ||
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
The video converter V-216D only works with installed SFP module.
Why to choose fiber optics:
- possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
- high-volume information transfer via single fiber
- complete immunity to electromagnetic interference
- resistance to weather conditions (humidity, electrostatic discharges and others)
- no tapping possibility
- low weight and small dimensions
Video converters of ULTIMODE series can cooperate with all analog CCTV cameras. They are designed for indoor operation. Our offer also includes the following video converters:
Price
Disc.
Quantity
688.90 EUR
0 %
COMPLETE WITH
![Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]](pict.main/l5550_.gif)
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Translation of the domain name into the set of numbers is performed by the appropriate DNS server, to which the computer sends a request for the translation of the... more »