View of the mount

The SDP102M E9639 mount has been designed for mounting on the ceiling a modern flat LCD or plasma monitor/television. Its load capacity is 60 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of 20 degrees.

The ceiling has to carry the load of the panel and the mount, including a wide margin of safety.

The mount cannot be installed on ceilings that do not provide firm hold (steel stud, old cinder block, suspended ceilings etc). If you are uncertain about the nature of your ceiling, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic required tools (not included): 3/16" drill bit, 1/2" masonry bit for concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.

Safety warning.

The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.

Some operations should be performed by two skilled people!

Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.

Name	Flat panel ceiling mount SDP102M (tilt)
Code	E9639
Screen size range	30” – 50”
Distance from ceiling (adjustable)	0.6 - 1.05 m
FDMI / MIS	VESA
Load capacity	60 kg
Tilt adjustment	20°
Rotation angle	-
Dimensions	773x310x60 mm
Weight	9 kg