MY CART
My Cart is empty
 »  CCTV  »  HD-TVI DVRs  »  HD-TVI 4.0

HD-TVI DVRs

HD-TVI 4.0

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7108HQHI-K1 (8ch, 1080p@15fps, H.265+, HDMI, VGA)
Code: M75138
Price w/o taxPriceDisc.Validity  
183.51 EUR183.51 EUR0 %
3-year warranty
HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7104HQHI-K1 (4ch, 1080p@15fps, H.265+, HDMI, VGA)
General view

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7104HQHI-K1 (4ch, 1080p@15fps, H.265+, HDMI, VGA)
Rear view

HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7104HQHI-K1 (4ch, 1080p@15fps, H.265+, HDMI, VGA)
View of the included accessories
Key features:
  • HD-TVI: 1080p, 720p recording resolution at 15 fps, WD1 and lower resolutions at 25 fps
  • HD-CVI, AHD: 2 MP recording resolution at 15 fps
  • Channels 1 and 2 support recording resolution of 3 MP at 15 fps
  • 1080p lite recording mode: 960x1080 at 25 fps
  • Support for 8 HD-TVI, AHD, HD-CVI or CVBS cameras + two IP cameras (max 4 MP, Hikvision or Onvif compliant)
  • H.265 and H.265+ video compression
  • Support for IE
  • Channel 0 - possibility to monitor all cameras with minimum demand for network bandwidth
  • Parallel operation of HDMI and VGA outputs up to 1920 x 1080 pixels
  • Searching recordings by alarm events
  • Digital zooming during live monitoring and playback
  • Synchronous playback from 4 channels
  • Support for IPv4, IPv6,
  • Monitoring the statuses of LAN, cameras, hard drives
Hikvision DS-7108HQHI-K1 is a 8-channel CCTV DVR capable of recording surveillance video provided in HD-TVI, AHD, CVBS and IP standards. The maximum recording resolution is 1080p@15fps, however channels 1 and 2 can support 3MP@15fps. In the case of VGA / WD1 / 4CIF / CIF resolutions, the maximum frame rate is 25 fps.
H.265 video compression
The DVR can record one or two video streams (primary and/or secondary) from each channel. The video can be compressed with the use H.265 method. Compared with the predecessor (H.264), H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or extended data retention time. H.265+ can further minimize the streams in typical video surveillance scenarios.
Special recording modes
The recording can be performed in different modes: continuous, motion detection (with pre- and post-event recording), alarm (with pre- and post-event recording), or continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
Refined client software
The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. Oner monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.
View of the control panel of the iVMS-4200 application
Hik-Connect is a mobile application, intended for smartphones running Android or iOS operating systems. It can be used for remote live viewing of images from DVRs, NVRs, network cameras via Wi-Fi, 2G or 3G networks, and for playing back recorded video files. The application connects with the devices by IP addresses and/or through the P2P cloud.
The start menu of the Hik-Connect app
with live view thumbnail
The live view screen
Working in the cloud
Hik-Connect is also the name of network service intended for Hikvison devices. The service is based on data processing in the cloud and integrates the following functions:
  • Remote access through the cloud
  • It allows access to the device without having an external IP address and when simplicity is the most important thing. Only the basic configuration of the network is required. The application on a PC or smartphone connects with the device via P2P cloud service.
  • DDNS server
  • DDNS assigns a fixed domain name to dynamically changing IP addresses (Dynamic DNS). This feature is useful when the ISP does not provide users with a fixed IP address. The condition for using DDNS is having a public IP address and providing access from the external network to the appropriate ports of the NVR (server and http, by default 8000 and 80). The connection is possible via a web browser, client application on a PC and on smartphones.
Advanced applications for organizing and operating video surveillance systems
This article provides an overview of applications dedicated for installers and users of Hikvision-based video surveillance systems.
Main window of SADP application
SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.
Specifications:
Name/modelDS-7108HQHI-K1
CodeM75138
Video formats
HD-TVI, AHD, HD-CVI, CVBS
Video inputs
BNC x 8 + IP x 2
HDMI/VGA resolutions
1080p: 1920x1080
SXGA: 1280x1024
720p: 1280x720
XGA 1024x768
Audio input / output connectorsRCA 1 / 1
Alarm inputs / outputs
-
Alarms and exceptionsMotion detection, video loss, camera tampering
Live monitoring
25 fps
Recording options5 MP
-
3 MP
15 fps (ch. 1, 2)
1080p15 fps
720p15 fps
WD1/4CIF25 fps
CIF
25 fps
Video bit rate range (single channel)32 kbps - 10 Mbps
Audio bit rate64 kbps
HDD capacity & interface1 x max 6 TB SATA HDD
S.M.A.R.T. monitoring toolsYES
NAS/SAN compatibility
YES (NAS)
External ports
2x USB 2.0; RJ-45 (10/100M Auto)
Secondary stream
WD1, 4CIF, CIF, QVGA, QCIF
Network protocols
TCP/IP; DHCP; DDNS; PPPoE; email; NTP; SNMP; UPnP
Software ports
Server - 8000
HTTP - 80
RTSP - 554
Remote monitoring
Internet Explorer
PTZ protocols
YES
ArchivingUSB storage device, remote server
Power input
12 VDC (from included PSU)
Power consumption
<12 W (without HDD)
Operating temperature-10°C...55°C
Operating humidity
10%...90%
Dimensions ( W x D x H )200 x 200 x 45 mm
Price w/o taxPriceDisc.Validity  
183.51 EUR183.51 EUR0 %
 
HD-TVI TURBO HD 4.0 DVR: Hikvision DS-7108HQHI-K1 (8ch, 1080p@15fps, H.265+, HDMI, VGA)
Code: M75138
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE