Amplifiers
Small size - indoor
Indoor Antenna Amplifier: AWS-1145
(87.5-862 MHz; return ch. 5-65 MHz)
(87.5-862 MHz; return ch. 5-65 MHz)
Code: B117028
Withdrawn from the offer
Distinguishing features
- full band (FM + TV): 87.5 - 862 MHz
- 20 dB gain (adjustment: -14 dB)
- return channel: 5-65 MHz
- low noise
- built-in 2-way splitter
- Zn-Al cast housing guarantying excellent shielding effectiveness
View of the amplifier
Top view
View of the inside
View of the included AC/DC adapter
AWS-1145 amplifiers are used in homes to distribute RF signals (from cable TV, MATV system, community antenna) to several receivers. The main feature of the amplifiers is continuous band from 87.5 to 862 MHz. It allows to use them in any RF distribution network including cable TV. Gain adjustment is combined with correction of cable loss.
The amplifiers feature passive return channel (5-65 MHz), which allows to implement them in cable TV systems providing Internet access. They also enable the user to connect remote control extenders that utilize RF cables (R93109).
The set includes AC/DC adapter with regulated 12V 120mA output, with 3.5 jack plug.
Specifications
| Code | B117028 | ||
| Type | AWS-1145 | ||
| Number of outputs | 2 | ||
| Frequency range | Band | Return channel | VHF / UHF |
| MHz | 5 - 65 | 87.5 - 862 | |
| Gain | dB | -4 +/-1 | 17/20 +/-1.5 |
| Gain adjustment | dB | – | 14 +/-1 |
| Max output level | dBμV | 100 IMA3 60dB 87 IMA2 60dB | |
| Noise figure | dB | 5 +/-1 | |
| Return loss | dB | > 10 | |
| Power | DC V/mA | 12/100 | |
| Operating temperature | oC | -25...+55 | |
Security notice for amplifier users
AWS-1145 amplifiers can be used only inside rooms. It is not allowed to mount them close to heaters etc. or in wet environment. Natural ventilation is a must. Due to risk of damage, before connecting power supply the user should make all connections first.
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Most of WLAN devices are equipped with SMA-RP connectors, whilst outdoor antennas are equipped with N-type connectors. Using H-155 cable, it is needed to end it with SMA... more »