Tools & Meters
Cable Strippers
Insulation Stripper HT-322S (for RG 8, 11, 213, H1000)
Code: E80035
Withdrawn from the offer
View of the stripper
How to use the stripper: put the cable in, turn the tool five times (each direction) and pull.
The coax is now ready for attaching F connector.
The coax is now ready for attaching F connector.
Application
A very useful tool for installers that connect lots of plugs to coaxial cables. It is equipped with two blades adjustable with the included wrench (depth of cut). The original length of the stripped sheath is 8 mm - it can be reduced to 6 mm.
COMPLETE WITH
![Coaxial Cable (75 ohm): Triset-11 PE 1.65/7.2/10 (gel-filled) [100m]](pict.main/e1025_100_.gif)
![Coaxial cable (75 ohm): TRISET-11 PE Cu 1.65/7.2/10 [100m]](pict.main/e1029_100_.gif)
SECTION LIBRARY
»
»
LIBRARY NEW TITLES
TO KNOW MORE
Community antenna (MATV system) may be defined as antenna installation where compensation of network attenuation is performed by one (central) set of amplifiers. The... more »