MY CART
My Cart is empty
 »  CCTV  »  IP Cameras  »  H.265

IP Cameras

H.265

IP Compact Camera: Signal HDC-250P (3MP, 2.8-12mm, 0.01 lx, IR up to 40m, H.265/H.264)
Code: K1886
Price w/o taxPriceDisc.Validity  
99.52 EUR99.52 EUR0 %
2-year warranty
IP Compact Camera: Signal HDC-250P (3MP, 2.8-12mm, 0.01 lx, IR up to 40m, H.265/H.264)
IP Compact Camera: Signal HDC-250P (3MP, 2.8-12mm, 0.01 lx, IR up to 40m, H.265/H.264)
IP Compact Camera: Signal HDC-250P (3MP, 2.8-12mm, 0.01 lx, IR up to 40m, H.265/H.264)

  • 3 MP image resolution: 2048 x 1536
  • Sensitivity of 0.01 lx in color mode
  • Video processing functions: 3D DNR, WDR, BLC, FLK
  • 2.8 - 12 mm varifocal lens providing 90° - 26° viewing angle
  • Built-in IR illuminator with range up to 40 m
  • Mechanical ICR filter
  • H.265, H.264, MJPEG video compression
  • Management through Internet Explorer, Firefox or free CMS software
  • Support for ONVIF v2.4 protocol
  • Power: 12 VDC or PoE (802.3af)
Signal HDC-250P compact IP camera employs 1/2.8" SONY CMOS image sensor with a resolution of 2048x1536 pixels (3 MP) and can provide video at frame rate up to 25 fps. The built-in 2.8-12 mm varifocal lens has viewing angle adjustable within 90° - 26° range. It cooperates with IR illuminator with range up to 30 meters, ensuring good video coverage in low light conditions and complete darkness. The camera can provide three independent video streams and offers three compression methods, H.265/H.264/MJPEG. The camera is intended for indoor or outdoor applications - its IP66 rated housing protects the electronics against adverse weather conditions. The camera can be conventionally powered from a 12 VDC source or with the use of PoE technology (802.3af).
The camera can use H.265, H.264 and MJPEG compression methods. The H.265 coding allows for two times higher compression ratio than H.264 with preservation of the image quality. This further saves network and memory resources. The selected type of compression must be supported by the NVR.
The configuration and operation control of the camera is performed via Internet Explorer, firefox or the included free CMS software. IPCSearcher application is used for searching Signal cameras in IP network, configuring network parameters, firmware updating, and changing parameters of the cameras and Signal NVRs. The application is particularly useful during the initial configuration of any video monitoring system with multiple cameras. FreeIP application that can be downloaded for Android or iOS mobile devices allows for remote monitoring of the surveillance video.
Specifications
NameHDC-250P
CodeK1886
StandardIP
Housing typeCompact
CompressionH.265/H.264/MJPEG
Resolution2048 x 1536 (3 MP)
Multi-stream operationYes
Frame rate25 fps at 2048 x 1536 and lower res.
 
Image sensor1/2.8" Sony Progressive Scan CMOS
IMX123 + Hi3516D
Sensitivity0.01 lx in color mode
S/N>52 dB
Lens (focal length)2.8 - 12 mm
Horizontal viewing angle90o - 26o
IR rangeUp to 40 m (*)
IR LEDs42µ x 4
ICRYes
Video processing3D DNR, WDR, BLC, FLK
Automatic/FixedAutomatic/Fixed
Alarm eventsMotion detection
Network interfaceRJ-45 10/100Base-T
Protocols
IPv4, HTTP, TCP/IP, FTP, NTP, RTSP, UDP, SMTP, DNS, DDNS
ONVIF complianceYes (v2.4)
Supported languagesEnglish, French, German, Hungarian, Spanish, Italian, Polish, Portuguese, Romanian, Turkish
Supported browsersIE, Firefox
Client softwareHeroSpeed CMS
Mobile appsFreeIP (Android, iOS)
English, Chinese
IP rating
IP66
Power12 VDC (±10%); PoE (802.3af)
Current consumption
700 mA (max)
Power consumption
8.4 W (max, with IR)
Installation temperature range-20°C...60°C (RH max 95%)
Dimensions200 x 171 x 83 mm
Weight0.87 kg

Price w/o taxPriceDisc.Validity  
99.52 EUR99.52 EUR0 %
 
IP Compact Camera: Signal HDC-250P (3MP, 2.8-12mm, 0.01 lx, IR up to 40m, H.265/H.264)
Code: K1886
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE