| No. | Name | Code |
1 | | J2004 |
2 | | J2005 |
3 | | J2007 |
4 | | J2208 |
5 | | E84383 |
6 | | E84915 |
7 | | J2710 |
8 | | E84905 |
9 | | E84728 |
11 | | E84726 |
12 | | E8290 |
13 | | E8291 |
14 | | J2008 |
15 | | J2010 |
16 | | E84704 |
21 | | E84725 |
22 | | E84717 |
23 | | E84715 |
24 | | E84470 |
25 | | E84380 |
26 |
| N-female crimped on H-155 cable
|
|
|
| The way we strip a cable not only depends on its size, but also on the kind of connector. It is very important to keep the proper length of the insulating layer which is removed from the cable, of the conducting sheath, insulating spacer, and the length of the inner conductor.... more »
|
|
|
| E84325 |
27 |
| N-female clamped on H-500/1000 cable
|
|
|
| The way we strip a cable not only depends on its size, but also on the kind of connector. It is very important to keep the proper length of the insulating layer which is removed from the cable, of the conducting sheath, insulating spacer, and the length of the inner conductor. The dimensions are precisely defined for each kind of connector and have to be strictly maintained to keep up with industry standards. ... more »
|
|
|
| E84322 |
28 |
| N-female (panel mount)
|
|
|
| The connector is made by renowned American producer - ANDREW. It is designed for operation up to 6GHz. Its low insertion loss is essential for use at so high frequencies where only specially designed connectors of high quality ensure good results.... more »
|
|
|
| E84321 |
29 |
| N-female crimped on CNT-200 cable (panel mount)
|
|
|
| The connector is made by renowned American producer - ANDREW, and used with CNT-200 cable. It is designed for operation up to 6GHz. Its low insertion loss is essential for use at so high frequencies where only specially designed connectors of high quality ensure good results.... more »
|
|
|
| E84316 |
30 |
| N-female crimped on CNT-400 cable
|
|
|
| The connector is made by renowned American producer - ANDREW, and used with CNT-400 cable. It is designed for operation up to 6GHz. Its low insertion loss is essential for use at so high frequencies where only specially designed connectors of high quality ensure good results.... more »
|
|
|
| E84314 |
31 |
| N-female clamped on CNT-400 cable
|
|
|
| The connector is made by renowned American producer - ANDREW, and used with CNT-400 cable. It is designed for operation up to 6GHz. Its low insertion loss is essential for use at so high frequencies where only specially designed connectors of high quality ensure good results.... more »
|
|
|
| E84312 |
32 | | E84483 |
33 | | E84552 |
34 | | E84554 |
35 | | E84710 |
36 | | E845652 |
37 | | E845651 |
38 | | E84565 |
39 | | E845601 |
40 | | E84559 |
41 | | E84558 |
42 | | E84557 |
43 |
| N-socket (for H-500/1000, crimped)
|
|
|
| The way we strip a cable not only depends on its size, but also on the kind of connector. It is very important to keep the proper length of the insulating layer which is removed from the cable, of the conducting sheath, insulating spacer, and the length of the inner conductor.... more »
|
|
|
| E84310 |
