| CCTV |  |
|
Instllation Components |
||
PRINTPower Supply DC12V/10A: DRA120-12FPA (switch mode)
73.01 EUR | ||
Discount: 0% | ||
The DRA120-12FPA power supply has been specially designed for powering CCTV devices and industrial control systems requiring stable 12VDC supplying voltage.
It has been designed and manufactured according to EN60950 specifications, and UL certified. The supplier ensures adjustment of the output voltage within the range of -10% to +15%. Its output is protected against short circuit and overloading. The power supply has been equipped with power factor correction.
General view
Rear view
Bottom view
Top view
View of the sticker
View of the wall bracket
Specifications:
| Name | DRA120-12FPA |
|---|---|
| Code | M1835 |
| Input | 115/230 VAC |
| Mains frequency | 47-63 Hz |
| Rated output voltage | DC12 V |
| Max. output current | 10 A |
| Max. output power | 120 W |
| Max. pulsation | 0.5% RMS |
| Efficiency | 73% - 85% |
| Norms | EN60950. UL508. ULI310 EN50081-1. EN50082-1 |
| Insulation test voltage | 3.0 kV AC RMS |
| Protection level | II |
| Insulation class | B |
| Max. ambient temperature | 50°C |
| IP level | IP20 |
| Dimensions AxBxC | 127 x 124 x 64 mm (see figure below ) |
| Weight | 1.0 kg |
The supplier has been equipped with screw terminals. There is possibility of parallel running - maximum 3 units - which allows to get DC12V 30A power source.
It is prepared for mounting on T35 rail. Modern circuitry ensures high efficiency and low pulsation (lower then +/-0.5%). IP20 rated plastic housing. Additional "Rdy" connectors allow to employ an external power indicator (useful feature in case of putting the supplier in an installation box).
Sketch of the device
73.01 EUR | ||
Discount: 0% | ||
