| CCTV |  |
|
Camera Accessories |
||
PRINTOutdoor Camera Housing: Marathon MH-805/12
19.13 EUR | ||
Discount: 0% | ||
Marathon MH-805/12 - metal housing designed for mounting CCTV cameras outdoors (IP66).
View of the housing
Bottom view
View of the inside -visible thermostat in the back of the housing
Specifications
| Name | MH-805/230V Marathon |
|---|---|
| Code | M5405 |
| External dimensions (H x W x D) | 120 x 108 x 410 mm |
| Maximum dimensions of protected camera (H x W x D) | 50 x 80 x 220 mm |
| Pane size | 64 x 53 mm |
| Heater: voltage / power | DC 230 V / 6W |
| Thermostat | ON: 15oC OFF: 25oC |
| Vertical mobility (with M5140 bracket) | 15o (up) / 90o (down) |
| Horizontal mobility (with M5140 bracket) | 180o (left) / 180o (right) |
| Distance from wall (housing situated perpendicularly to wall, M5140 bracket) | adjustable: 0 to 10 cm |
| Certificates | CE, RoHS, IP66, WEEE |
| External finish | powder paint |
| Material | aluminum |
| Weight | 1.6 kg |
The housing has been equipped with a heater and thermostat. The components keep the temperature inside the housing above a minimum level suitable for proper operation of the installed camera. They eliminate the problems with fogged up pane or lens and excessive humidity, which may even make it impossible to operate insufficiently protected cameras.
In the rear part of the housing there are holes for cables.
The housing has adjustable rainshield protecting the lens against excessive sunlight, as well as limiting influence of rainfall etc. on the pane.
19.13 EUR | ||
Discount: 0% | ||
