The patch cord ULTIMODE PC-011D is made of two parallel sections of multimode fiber optic cable with a length of 1 meter, terminated with two SC connectors (pair) on one side and with two FC connectors on the other.

View of the patch cord

View of the SC and FC connectors

Distinguishing features:

Patch cord ULTIMODE PC-013D is made of two parallel sections of multimode fiber optic cable with a length of 1 meter, terminated with two SC connectors (pair) on one side and with two FC connectors on the other. SC and FC connectors are currently the most popular optical coupling elements. SC connectors feature simple matching (push-pull coupling with a snap), rectangular cross-section allowing dense packing of the connectors on the panel, and plastic construction (of course outside the ferrule). FC connectors have threaded connection that ensures mechanical isolation of the ferrule and fiber.

ULTIMODE patch cords are characterized by low attenuation and back reflection (reflectance). They use highest quality ferrules. Each patchcord passes individual quality control (inspection of surfaces and measurement of transmission parameters - insertion and return loss).

The optical fiber used in the patch cords is OM1 multimode fiber. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 3.5 dB/km for 850 nm, and 1.5 dB/km for 1310 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.

Name:	ULTIMODE PC-013D
Code:	L3113
Length:	1 m
Fibers:	2 x multimode, 62.5/125
Connectors:	SC (A1)	SC (A2)	FC (B1)	FC (B2)
Insertion loss:	< 0.25 dB	< 0.25 dB	< 0.25 dB	< 0.25