| No. | Name | Code |
1 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from two satellites and terrestrial antenna to sixteen outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944816 |
2 |
|
|
|
|
| Multiswitch from well known Terra company, for small and medium-size SMATV systems. Automatic powering of RF preamplifier in terrestrial path. ... more »
|
|
|
| R70808 |
3 |
|
|
|
|
| Multiswitch from well known Terra company, for small and medium-size SMATV systems. Automatic powering of RF preamplifier in terrestrial path. ... more »
|
|
|
| R70812 |
4 |
|
|
|
|
| Multiswitch from well known Terra company, for small and medium-size SMATV systems. Automatic powering of RF preamplifier in terrestrial path. ... more »
|
|
|
| R70816 |
5 |
|
|
|
|
| The tap is used in multiswitch installations to extend the bus. The bus, carrying signals from one Quatro LNB, consists of four cables. Additionally, the tap also distributes terrestrial TV signals.... more »
|
|
|
| R70518 |
6 |
|
|
|
|
| This kind of high-quality multiswitches from Terra is dedicated for small and medium SMATV systems. It has RF pre-correction and cable length compensation (groups of inputs with different output levels).... more »
|
|
|
| R70624 |
7 |
|
|
|
|
| Multiswitches designed for cooperation with two Quatro LNBs and terrestrial TV antenna, and allow to build medium and large installations. Especially useful in multi-staircase buildings where they can be used to create subnetworks. ... more »
|
|
|
| R70866 |
8 |
|
|
|
|
| This two-LNB multiswitch has been designed for distributing satellite signals to a number of users (medium and large SMATV/multiswitch systems). It is suitable for multi-staircase buildings (division into subnetworks).... more »
|
|
|
| R70858 |
9 |
|
|
|
|
| Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, allowing to build medium and large SMATV systems. Suitable for multi-staircase buildings (division into subnetworks). ... more »
|
|
|
| R70862 |
10 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from two satellites and terrestrial antenna to eight outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944808 |
11 |
|
|
|
|
| This Signal multiswitch is designed for distribution of signals from one satellite and terrestrial broadcasts. It is suitable for one-family house. Signal products guarantee high quality standards. ... more »
|
|
|
| R6944504 |
12 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from one satellite and terrestrial antenna to eight outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944508 |
13 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from one satellite and terrestrial antenna to twelve outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944512 |
14 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from one satellite and terrestrial antenna to sixteen outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944516 |
15 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from two satellites and terrestrial antenna to four outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944804 |
16 |
|
|
|
|
| This Signal multiswitch has been designed for use in individual antenna systems. It distributes signals from two satellites and terrestrial antenna to twelve outlets. Suitable for one-family houses and small multi-family buildings. High quality from Signal.... more »
|
|
|
| R6944812 |
17 |
|
|
|
|
| The amplifier is designed for using together with multiswitches, e.g. when the distance between the multiswitch and terminal socket(s) is to big for direct connection. But the main purpose for employing the AI-414 device is splitting satellite and TV/FM signals within an apartment or house, where several outlets are needed. It is well to remember that within the apartment installation only one satellite receiver can be used, which may be connected to any of the outputs. The terrestrial signals are simultaneously available at all outlets. The amplifier transmits reversely any possible control signals DiSEqC, 22kHz, 14/18V.... more »
|
|
|
| R904075 |
18 |
|
|
|
|
| The multiswitch enables to combine VHF and UHF terrestrial TV signals with satellite TV IF band (950-2300 MHz) from four polarizations out of two satellites and to distribute them via single cable to sixteen satellite receivers. It is contolled with DiSEqC signal, and does not support Burst Tone.... more »
|
|
|
| R75102 |
21 |
|
|
|
|
| This kind of multiswitches is dedicated for small (4-16 outlets) and medium size (17-70 outlets) subscriber systems with distribution of the first SAT intermediate frequency, and terrestrial TV signals. The multiswitches have to work inside buildings.... more »
|
|
|
| R70604 |
22 |
|
|
|
|
| Power supply (AC/DC adapter) for multiswitches from Signal family.... more »
|
|
|
| R694494 |
23 |
|
|
|
|
| Multiswitch for receiving broadcasts from four satellites, with four outputs... more »
|
|
|
| R694495 |
24 |
|
|
|
|
| Multiswitch for receiving broadcasts from four LNBs, with six outputs (to six sat receivers).... more »
|
|
|
| R694496 |
25 |
|
|
|
|
| Multiswitch for receiving broadcasts from four LNBs, with twelve outputs (to twelve sat receivers).... more »
|
|
|
| R694497 |
26 |
|
|
|
|
| Multiswitch for receiving broadcasts from four LNBs, with sixteen outputs (to sixteen sat receivers).... more »
|
|
|
| R694498 |
27 |
|
|
|
|
| Multiswitch for receiving broadcasts from four LNBs, with eight outputs (to eight sat receivers).... more »
|
|
|
| R694499 |
28 |
|
|
|
|
| The multiswitch enables to combine VHF and UHF terrestrial TV signals with satellite TV IF band (950-2300 MHz) from four polarizations out of two satellites and to distribute them via single cable to four satellite receivers. It is contolled with DiSEqC signal, and does not support Burst Tone.... more »
|
|
|
| R75091 |
31 |
|
|
|
|
| The multiswitch is dedicated for medium and bigger installations (20-200 sockets) with distribution of SAT IF and terrestrial TV signals. The multiswitch has built-in amplifiers for terrestrial and satellite TV. It is not equipped with its own power supply. MSV-5xx series enables adjustment of SAT IF gain (independently for higher and lower band - as distinct from MSR-5xx series). It allows to equalize levels of the bands, what reduces cross-coupling and improves signal quality. The multiswitch has been designed for indoor use only.... more »
|
|
|
| R70712 |
32 |
|
|
|
|
| The multiswitch is dedicated for medium and bigger installations (20-80 outlets) with distribution of SAT IF and terrestrial TV signals. The multiswitch has got built-in amplifiers for terrestrial and satellite TV. MSV-5xx series enables adjustment of SAT IF gain (independently for higher and lower band - as distinct from MSR-5xx series). It allows to equalize levels of the bands, which reduces cross-coupling and improves signal quality.
The multiswitch has been designed for indoor use only.... more »
|
|
|
| R70708 |
33 |
|
|
|
|
| This kind of multiswitches is dedicated for small (4-16 outlets) and medium size (17-70 outlets) subscriber systems with distribution of the first SAT intermediate frequency and terrestrial TV signals.... more »
|
|
|
| R70616 |
34 |
|
|
|
|
| This kind of multiswitches is dedicated for small (4-16 outlets) and medium size (17-70 outlets) subscriber systems with distribution of the first SAT intermediate frequency and terrestrial TV signals. The multiswitches have to work inside buildings.... more »
|
|
|
| R70612 |
35 |
|
|
|
|
| This kind of multiswitches is dedicated for small (4-16 outlets) and medium size (17-70 outlets) subscriber systems with distribution of the first SAT intermediate frequency and terrestrial TV signals. The multiswitches have to work inside buildings.... more »
|
|
|
| R70608 |
36 |
|
|
|
|
| The multiswitch allows to mix VHF and UHF TV signals and SAT IF (950-2150 MHz, from four polarizations) and distribute them with one coaxial cable to four satellite receivers. For larger number of receivers there will be also needed cascadable multiswitches R70553, and - in big installations - the R70501 amplifiers. Multiswitch is powered with external power supply, e.g. R71465.... more »
|
|
|
| R70554 |
37 |
|
|
|
|
| Cascadable multiswitch cooperating with end-of-line multiswitch R70554. The multiswitch allows to mix VHF and UHF TV signals and SAT IF (950-2150 MHz, from four polarizations) and distribute them with one coaxial cable to four satellite receivers. ... more »
|
|
|
| R70553 |
38 |
|
|
|
|
| The amplifier is designed for amplification the first satellite intermediate frequency within subscriber networks constructed of 5-input multiswitches.... more »
|
|
|
| R70511 |
39 |
|
|
|
|
| The amplifier is designed for first IF amplification within networks build up with 5-input multiswitches. SA-501 used with MS553 R70553 and MS554 R70554 multiswitch cascades, allows to connect up to 80 subscribers. It is used also for terrestrial TV signals (push-pull amplifier), and delivers power supply to LNBs. Its SMPS power supply is equipped with overload protection.... more »
|
|
|
| R70501 |
40 |
|
|
|
|
| The amplifier has been designed for use in small and medium multiswitch installations. It is suitable for cooperation with Terra MS-951/952 multiswitches. The device amplifies both satellite and terrestrial signals. It may be powered locally or through line. Of course all paths transfer DC voltage.... more »
|
|
|
| R694491 |
41 |
|
|
|
|
| The amplifier has been designed for use in small and medium multiswitch installations. It is suitable for cooperation with Terra MS-554/553 multiswitches. The device amplifies both satellite and terrestrial signals. It may be powered locally or through line. Of course all paths transfer DC voltage.... more »
|
|
|
| R694490 |
42 |
|
|
|
|
| The amplifier is designed for amplification of the first SAT IF within installations built with 9-input multiswitches. SA-901 is being used in cascades of MS951 R70951 and MS952 R70952 multiswitches, and allows to make a system with up to 80 subscribes' terminals. It amplifies TV SAT and terrestrial TV signals. Push-pull type amplifier in terrestrial path has been implemented. SA-901 also ensures power supplying for the system. The power supply (switched mode) is equipped with short-circuit protection.... more »
|
|
|
| R70901 |
43 |
|
|
|
|
| The amplifier is designed for amplification of the first SAT IF, within installations built with 9-input multiswitches. SA-911 is being used in cascades of MS951 and MS952 multiswitches, and allows to make a system with up to 80 subscribes' terminals. It amplifies TV SAT and terrestrial TV signals, and transfers LNB powering. Push-pull type amplifier in terrestrial TV path has been employed.... more »
|
|
|
| R70911 |
44 |
|
|
|
|
| Cascadable multiswitch, cooperating with end-of-line multiswitch R70952. The MS-951 multiswitch allows to add terrestrial VHF and UHF signals to SAT IF (950-2150 MHz, four combinations of polarizations from two satellites), and send the mixed signals with single coax to four satellite receivers. Switching of the signal from the satellites/polarizations is performed with ToneBurst or DiSEqC 2.0 control signal.... more »
|
|
|
| R70951 |
45 |
|
|
|
|
| The multiswitch enables to combine VHF and UHF terrestrial TV signals with satellite TV IF band (950-2150 MHz) from four polarizations out of one satellite and to distribute them via single cable to twelve satellite receivers.... more »
|
|
|
| R75083 |
48 |
|
|
|
|
| The multiswitch is used to build a cascade in medium-sized SAT TV installation.... more »
|
|
|
| R72144 |
49 |
|
|
|
|
| The multiswitch allows to combine VHF and UHF terrestrial TV signals with satellite TV IF band (950-2150 MHz) from four polarizations out of two satellite and to distribute them via single cable to eight satellite receivers. The multiswitch has been equipped with passive terrestrial TV path.... more »
|
|
|
| R71908 |
52 |
|
|
|
|
| The multiswitch allows to combine VHF and UHF terrestrial TV signals with satellite TV IF band (950-2150 MHz) from four polarizations out of one satellite and to distribute them via single cable to six satellite receivers. The multiswitch has been equipped with active terrestrial TV path.... more »
|
|
|
| R71506 |
54 |
|
|
|
|
| The power supply does not have a separate ON/OFF switch.... more »
|
|
|
| R71465 |
55 |
|
|
|
|
| The MS-952 multiswitch allows mixing terrestrial VHF and UHF signals with SAT IF (950-2150 MHz, from effective four polarizations - from two satellites), and sending all the signals with single coax to four satellite receivers. Switching (choosing) of the signal from the satellites is performed with ToneBurst or DiSEqC 2.0 control signal. In the case the number of subscribers exceeds four, there are used cascadable multiswitches R70951.... more »
|
|
|
| R70952 |
56 |
|
|
|
|
| 110cm high-gain satellite dish providing reliable reception in very bad weather conditions or in regions with lower signal level. ... more »
|
|
|
| A9658 |
