My Cart is empty

Discontinued items

Optical Output LNB: GI FibreMDU
Code: A9881
Withdrawn from the offer
Mobile Sat Dish: Camping 35 (offset)
View of the LNB. Neck diameter: 40 mm
Mobile Sat Dish: Camping 35 (offset)
Another view of the LNB - visible FC/PC connector
Mobile Sat Dish: Camping 35 (offset)
The kit includes: power supply, water protective sleeves, F to F adapter
Mobile Sat Dish: Camping 35 (offset)
View of the packaging
Global Invacom FibreMDU A9881 Optical Output LNB is a modern device for receiving satellite signals and distributing them in optical form. The optical signal is then converted to electrical form using GI FibreMDU Virtual Quatro Converter A9884.
The LNB has FC/PC optical output which provides satellite signals from both polarizations and both bands. The LNB is recommended for large SMATV systems and installations where the problem is a long distance between the satellite dish and terminal outlets, impossible to solve even using the thickest coaxial cables. The optical signal from the LNB can be transmitted over distances up to several kilometers.
The LNB is powered from the included power supply (230 VAC / 12 VDC) via F connector. In the case of a greater distance between the dish and an AC power outlet, the output 12 VDC voltage can be provided to the LNB via a copper coaxial cable, e.g. Triset-113 E1015.
The LNB uses the 1310 nm window and cooperates with a virtual LNB - GI FibreMDU Virtual Quatro A9884. The set is an ideal solution in the case of larger multiswitch systems. By using this combination, in addition to a freely selectable distance between the dish and the distribution network, we run only a single fiber optic cable, instead of four coaxial cables. The change of the transmission medium can be made just at the location of the multiswitch.
SMATV systems based on fiber optics are ideal solutions for:
  • sports facilities
  • entertainment complexes
  • modern housing estates, which - because of the aesthetics - use a single satellite dish
Main features:
  • flat frequency response in the whole frequency range,
  • very good isolation (between selected path and unwanted path),
  • output level higher by 10 dB in comparison with typical LNBs available on the market,
  • superior Phase Noise performance (the ratio of 10 dB to other Universal LNBs available on the market),
  • very low interference in the 850 MHz-1700 MHz band, which improves reception of weak signals
  • integrated heat sink,
  • resistance to UV radiation.
NameGI FibreMDU
Input frequency range
10.7 GHz - 12.75 GHz
Polarizationlinear, horizontal and vertical
Optical output power7 dBm +/- 0.2 dBm
Max number of split paths (optical)
Conversion gain
72 dB
Gain flatness (IF: 0.95 GHz to 5.45 GHz)4 dB
Gain ripple (in a 26 MHz bandwidth)< 1 dB
LNB type
12 VDC, 0.3 A
Optical output type
Operating temperature
Neck diameter
40 mm
Weight440 g
Withdrawn from the offer
Optical Output LNB: GI FibreMDU
Code: A9881