2

The M1880 voltage converter - from 6-12 VDC to 12 VDC (2 A) - is designed to power various electronic devices, in particular CCTV cameras. The DC voltage at the input of the converter may vary from 6 V to 12 V, whereas the output of the converter (DC plug 2.1/5.5) provides stabilized 12 VDC voltage (maximum current capacity: 2 A).

2010-06-04

4

The power supply has been designed to power devices that need 12VDC power and do not exceed 4.0A current consumption.

2007-01-01

6

LZ-8/POL is a simple DC power supply distributor that provides power from one higher power unit to a number of devices. The distributor splits the input into 8 outputs; each of them is protected by polymer fuse...

2009-08-03

8

AC/DC adapter (110-230VAC/12VDC) for powering devices requiring 12VDC (adjustable). Max load 20A.

2008-07-04

10

Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current consumption not exceeding 1A. It is suitable for the majority of CCTV cameras.

2011-01-31

12

2007-01-01

14

2007-01-01

16

2007-01-01

18

The device comes in a heavy duty housing which meets esthetic requirements. Power-On function is signalized by LED placed on the panel. The stabilized output voltage can be adjusted from 12 V to 14 V for compensating voltage loss in longer cables.

2007-01-01

20

The stabilized power supply is designed for equipment requiring 12 VDC stabilized voltage (-5...+20%). The output voltage can be set within the range 11.0 V ... 15.0 V, using trim pots, independently for each of three sections (each section with three outputs). The total current capacity of the power supply is 3.0 A. The power supply is equipped with three kinds of protections: short circuit protection (SCP) - independent for each output, overload protection (OLP), and over-voltage protection (OVP). Its metal casing (color: RAL 9003), mountable on a wall, is equipped with LEDs signaling input ...

2011-03-18

22

Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with total current consumption not exceeding 2A. It is suitable for the majority of CCTV cameras.

2011-04-07

24

The switching-mode power supply has aesthetic, splash-proof housing suitable for outdoor applications (IP53 - to be mount on a wall under a roof). The power connector is sheltered by the cover. Correct installation of power supply is possible only in vertical position, with connectors facing downward.

2010-03-16

26

2007-01-01

28

The stabilized power supply unit is designed to supply equipment demanding stabilized voltage of 12-14 VDC. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter response time to any changes than in the case of a switching regulator.

2011-10-14

30

The stabilized power supply unit is designed to supply equipment demanding stabilized voltage of 12-15 VDC and current up to 1 A per device. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter response time to any changes than in the case of a switching regulator.

2011-10-14