| No. | Name | Code |
1 | | M1838 |
2 | | D0356 |
3 | | R70866 |
4 | | R70858 |
5 | | R70862 |
6 | | M1837 |
9 | | M18289 |
10 | | R694494 |
11 | | M18287 |
12 | | M1828 |
13 | | S962014 |
15 | | S962001 |
16 | | R91235 |
17 | | R912046 |
19 | | M1835 |
20 |
| Indoor antenna amplifier AWS-1141 47-862MHz 1-in, 1-out 21dB
|
|
|
| The RF amplifier AWS-1141 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11683 |
21 | | M1832 |
22 | | M18245 |
23 | | M1814 |
24 |
| PoE Power Supply PSA16U-480
|
|
|
| PSA16U-480 is designed for powering devices using PoE technology. This technology allows to run the system with only one UTP/FTP cable which transmits data and provides supplying voltage. Compliance with IEEE802.3af standard enables the user to employ the supplier for powering any PoE device.... more »
|
|
|
| M1890 |
25 |
| Indoor Antenna Amplifier AWS-1244 (47-862MHz 1-in, 4-out, 21/23dB)
|
|
|
| The broadband amplifier AWS-1244 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117026 |
26 |
| Indoor Antenna Amplifier: AWS-1243 (47-862MHz; 1-in, 3-out; 24/26 dB)
|
|
|
| The broadband amplifier AWS-1243 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117025 |
27 |
| Indoor Antenna Amplifier AWS-1242 (47-862MHz 1-in, 2-out, 25/27dB)
|
|
|
| The broadband amplifier AWS-1242 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117024 |
28 |
| Indoor Antenna Amplifier AWS-1241 (47-862MHz 1-in, 1-out, 28/31dB)
|
|
|
| The broadband amplifier AWS-1241 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To use this option it is needed to set the jumper (it is shown in enclosed instructions).... more »
|
|
|
| B117023 |
29 |
| Indoor antenna amplifier AWS-1144 47-862MHz 4-out 13/15dB
|
|
|
| The RF amplifier AWS-1144 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11686 |
30 |
| Indoor antenna amplifier AWS-1143 47-862MHz 3-out 17/19dB
|
|
|
| The RF amplifier AWS-1143 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11685 |
31 |
| Indoor antenna amplifier: AWS-1142 SilverLine (47-862MHz, 2-out, 17/19dB)
|
|
|
| The RF amplifier AWS-1142 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one needs to short the jumper, as it is shown in the included instructions.... more »
|
|
|
| B11684 |
33 | | R90500 |
34 |
| Indoor Antenna Amplifier - AWS-133S (with power supply)
|
|
|
| It is four-input, one-output antenna amplifier for small TV installations. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier has switches allowing to provide +12 V power to preamplifiers installed near UHF antenna. The amplifier can also be fed through the output (via coaxial cable). There are separate gain adjustments for each input.... more »
|
|
|
| B11883 |
36 |
| Indoor Antenna Amplifier - AWS-144 (with power supply)
|
|
|
| It is one-input, four-output antenna amplifier for small TV installations. The12V/100mA (output) stabilized power supply is included in the set. The amplifier has switch allowing to provide +12 V power to preamplifier installed near the antenna. It can be also fed through one of the outputs (via coaxial cable).... more »
|
|
|
| B1170 |
37 |
| Indoor Antenna Amplifier: AWS-143ST (with power supply)
|
|
|
| Broadband amplifier for home TV installations (also for distributing cable TV to multiple receivers). The amplifier can provide +12VDC voltage to a preamplifier installed on/near the antenna. 12V/120mA (output) stabilized power supply is included in the set. The amplifier can also be fed through one of its outputs (this one marked with "DC" - input A). It is possible when connecting another power supply with separator (not included) to the coax cable coupled with the output.... more »
|
|
|
| B11689 |
38 |
| Indoor Antenna Amplifier - AWS-130S (with power supply)
|
|
|
| It is three-input, one-output antenna amplifier for small TV installations. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier has switches allowing to provide +12 V power to preamplifiers installed near UHF antenna. The amplifier can also be fed through the output (via coaxial cable). There are separate gain adjustments for each input.... more »
|
|
|
| B11682 |
39 |
| Indoor Antenna Amplifier: AWS-35 (with power supply)
|
|
|
| Three-input (VHF1/FM, VHF3/UHF, UHF) antenna amplifier for small and medium TV installations. 12V/250 mA (output) stabilized power supply is included in the set. The amplifier automatically provides +12VDC voltage to preamplifiers (if installed) near antennas. The amplifier can also be fed through the output (via coaxial cable).... more »
|
|
|
| B11635 |
40 |
| Indoor Antenna Amplifier: AWS-34 (with power supply)
|
|
|
| Two-input antenna amplifier for small and medium-size TV installations. The first input is broadband (full TV and FM band), but with independent gain adjustment in VHF1/FM, VHF 3, and UHF bands. The second input is prepared for UHF channels. 12V/250 mA (output) stabilized power supply is included in the set. The amplifier can provide +12VDC voltage to the preamplifiers installed near antennas (automatically). The amplifier can also be fed through the output (via coaxial cable).... more »
|
|
|
| B1163 |
42 |
| Outdoor Antenna Amplifier: AWS-1021M (with power supply)
|
|
|
| Four-input antenna amplifier for home TV installations. The 12V/100 mA (output) stabilized power supply with RF/DC separator is included in the set. The amplifier is fed through the same coaxial cable which transmits the signal from the amplifier to the receiver.... more »
|
|
|
| B11551 |
43 |
| Outdoor Antenna Amplifier: AWS-118M (with power supply)
|
|
|
| Three-input antenna amplifier for home TV installations. The 12VDC/100 mA (output) stabilized power supply with RF/DC separator is included in the set. The amplifier is fed through the same coaxial cable which transmits the signal from the amplifier to the receiver. ... more »
|
|
|
| B11401 |
44 | | B1066 |
46 | | B1025 |
47 | | B1019 |
48 |
| 12V 100mA DC Power Supply Adapter for antenna amplifier
|
|
|
| This power supply has a "B" mark on its casing. Inside there is a protective fuse for overcurrents. LED on the top is to signalize that the unit is working. It does not have an ON/OFF switch. The adapter supplies power to units installed in antenna power boxes directly over a wire. It comes with a separator that allows to feed power over the same cable that video/audio signal is transmitted from amplifiers to receivers.... more »
|
|
|
| D0010 |
49 |
| Power Supply Adapter - 12VDC 0.1A (for antenna amplifiers, adjustable)
|
|
|
| This power supply has security "B" mark on its casing. There is a protective fuse inside. LED on the top signalizes that the unit is working. It does not have an ON/OFF switch. The adapter supplies power to amplifiers installed in antenna boxes, directly via coaxial cable. It comes with RF/DC separator that allows to supply power over the same cable that transmits signal to receivers. The knob on the top of the adapter is used for adjusting the value of output voltage.... more »
|
|
|
| D0015 |
50 |
| Power Supply AL-100 24V/0.1A (F) for antenna amplifiers - ALCAD
|
|
|
| The AL-100 supplier is dedicated for powering 24V family of Alcad amplifiers installed on antenna masts. AL-100 is not intended for unprotected outdoor use. It should not be installed in areas with increased humidity, near heaters, radiators and in other hot or cool (in winter) places. The unit requires natural ventilation, so it must not be covered by any objects. It ought not to be connected to the mains until all connections within an antenna installation have been properly made.... more »
|
|
|
| R90386 |
51 |
| Power Supply AL-105 12V/0.1A (F) for antenna amplifiers - ALCAD
|
|
|
| The AL-105 supplier is dedicated for powering 12V family of Alcad amplifiers installed on antenna masts. AL-105 is not intended for unprotected outdoor use. It should not be installed in areas with increased humidity, near heaters, radiators and in other hot or cool (in winter) places. The unit requires natural ventilation, so it must not be covered by any objects. It ought not to be connected to the mains until all connections within an antenna installation have been properly made.... more »
|
|
|
| R903087 |
52 | | R871727 |
53 | | R871722 |
54 | | R72344 |
55 | | R71465 |
56 | | M1830 |
57 | | M1829 |
58 |
| Power supply: AWZ 250 (12VDC adjust./ 5x0.5A, metal housing)
|
|
|
| The stabilized power supply unit is designed to supply equipment demanding stabilized voltage of 12VDC. The linear stabilizing system incorporated in the unit provides voltage with less noise and shorter time of response to changes in comparison with a switch regulator.... more »
|
|
|
| M18285 |
60 | | M1815 |
62 | | M1810 |
63 | | M1805 |
64 | | B1018 |
