Power Supply Adapter AWZ-820 (11-15VDC, 3x[3x0.5A])

Code: M18289
This product is no longer available
Estore: Library:

Support

Details

This regulated power supply has been design to ensure stable supplying voltage for devices (e.g. cameras) that should be operated by 12VDC. It has three independent main outputs that may be fed with individually set voltage at the input of the lines from 11 to 15 V).
Specifications:
  • Input voltage................................: 230V AC / 50Hz
  • Output voltage..............................: 12V DC (regulated 11.0V - 15.0V)
  • Transformer.................................: 80VA>
  • General number of outputs............: 9
  • Maximum load of individual output..: 0.5A
  • Short-circuit protection..................: 0.5A (very quick)
  • Overload protection.......................: 0.5A (very quick)
  • Surge protection...........................: varistors
  • Operating temperature .................: 0-45
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)


Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)


The device employs three modern integrated DC voltage regulators with decreased level of noise and time of response - in comparison with typical SMPS solution.
Nine outputs have separate protections F500mA. Any short circuit or overload will effect in cutting power supply only in the separate circuit.
The outputs are divided into three groups, the sections A, B, C. Each section means independent main output, equipped with possibility of setting optimum output voltage (with dedicated potentiometer).
The presence of voltages at outputs is shown by indicators on the front panel of the supplier.