View of the device

Rear view

Bottom view

View of the packaging

G-8 is a passive device allowing to connect up to eight YAP cables (coax + power) and distribute power from a larger power suplly to a number of CCTV cameras. At one side there are BNC sockets for connecting cables to a DVR, at the second side - terminals for connecting coaxial cables from cameras and branch-joint for 8 power lines for the cameras. Each of the power outputs is protected by fuse (LED indicators show presence of the voltage - dark LED means a failure in the circuit).

The advantage of individual protections for all cameras is continuous operation of the system in the case of deliberate shorting the power circuit of a camera.

Name	Power Supply Distributor: G-8
Code	M1790
Number of video inputs/outputs	8
Number of power outputs	8
Number of power inputs	2
Supplying voltage	DC 0-24V (typically 12V)
Max. total current (input)	8 A
Max. current of single output	1 A
Type of video inputs	8 x clamps for core conductor and braided screen
Type of video outputs	8 x BNC female
Type of fuses	1A/250V, 5/20mm, time-delay
Type of power input	2.1/5.5mm socket/ cable clamps
Type of power outputs	Cable clamps
Operating temperature / humidity	-50oC ... +55oC / <95%
Dimensions (W x H x D)	213x36x93 mm
Weight	0.29 kg

G-8 is equipped with two power inputs (2.1/5.5mm socket/ cable clamps) that are connected in parallel. It is unimportant which of the two connectors is used - there may be used 2.1/5.5 DC jack (E3510), or stripped wires. This solution allows to connect the G-8 distributors in series - e.g. power supply to the DC IN socket of the first device, the + and - terminals via cable and WT-2.1 jack to the DC IN of the second G-8.
The device is prepared for direct connecting to power supply (via with 2.1/5.5mm jack) with YAP-75 M6500, M6501, YAR-75 M5995, M5997 cables.

Connections made via G-8 allow to use regular coaxial cables between the distributor and DVR, whereas the YAP cables are only used for connecting the distributor with the cameras. In case of a failure (usually due to mechanical reasons) it will be easier to exchange the regular cables between the distributor and DVR.