MY CART
My Cart is empty

Projector Ceiling Mount: PD200
Code: E9659
Withdrawn from the offer
Replacements
E93613Projector Ceiling Mount: Signal PRB-3
A new model will be available since August 2012
Projector Ceiling Mount: PD200
View of the mount
The mobility range
Sketch of the mount
The PD200 E9659 mount has been designed for mounting a multimedia projector on the ceiling. Its load capacity is 15 kg. The mount allows 360 deg rotation, and due to telescopic construction of the arm - easy (without additional tools) adjustment of vertical position of the projector.
The wall has to carry the load of the panel and the mount, including a wide margin of safety.
The mount cannot be installed on ceilings that do not provide firm hold (steel stud, old cinder block, suspended ceilings etc). If you are uncertain about the nature of your ceiling, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.
The basic required tools (not included): 3/16" drill bit, 1/2" masonry bit for concrete block installations, electric drill, wrench or socket set, Phillips screwdriver.
Safety warning.
The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.
Some operations should be performed by two skilled people!
Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Specifications
NameProjector ceiling mount PD200
CodeE9659
Distance from ceiling (adjustable)1100 - 1970 mm
FDMI / MISVESA
Load capacity15 kg
Tilt adjustment-
Rotation angle360°
Dimensions150x(1100-1970)x182 mm
Weight3.8 kg
Collective package - 5 items. Price for one item.
Withdrawn from the offer
Replacements
E93613Projector Ceiling Mount: Signal PRB-3
 
Projector Ceiling Mount: PD200
Code: E9659