Connectors
TNC/RP H-155
RP-TNC Female (to crimp on H-155 cable, gilded)
 |  |
Component parts of the socket |
The way we strip a cable not only depends on its size, but also on the kind of connector. It is very important to keep the proper length of the insulating layer which is removed from the cable, of the conducting sheath, insulating spacer, and the length of the inner conductor. The dimensions are precisely defined for each kind of connector and have to be strictly maintained to keep up with industry standards.
| The connector should be crimped with crimping tool |  | 6.3 mm |
Application
High-frequency (up to 11GHz) coaxial connector.
Notice
The connector is used in RF applications up to 11 GHz, with 50 ohm cables (H-155 and RLF-5) - for example in 2.4 GHz transceivers and antennas.
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Short guide for those who would like to perform/replace antenna installation on their own and live in areas with good reception conditions. In the case of low signals,... more »