| Installations |  |
|
Tools |
||
PRINTSatellite Signal Meter DSM100
273.76 EUR | ||
Discount: 0% | ||
Front view
View of the meter in its case
Rear view
View of the sticker
Bottom view
Top view
View of the case
The included accessories
The device is dedicated for installers doing individual and SMATV installations. It enables the installer to set sat dish precisely, as well as measure parameters of satellite signal like BER, C/N. It does not generate DiSEqC signal. The meter has been equipped with backlit LCD display.
Identification of satellite is performed through entering data of any transponder working on it. Level bar allows easy adjustment of optimum antenna orientation. Just in the moment of finding a satellite, the meter indicates BER value (showing signal quality). The set includes battery charger, transmission cable (it allows to save transponder data in a PC), and CD-ROM with software for enabling the data transmission.
Main features:
- Simple to use graphic user's interface.
- Easy operation - especially important for beginners.
- Possibility of loading satellite/transponder parameters from a PC - via serial port.
- Large memory allowing to save data for tens of satellites.
- Internal powering of LNB.
- 22kHz generator.
- Switchable-backlit LCD display.
- Measurement C/N.
- Battery level indicator.
- Built-in 8.8V rechargeable battery
Specifications:
| Name | DSM-100 | |
| Code | R10813 | |
| Frequency range | MHz | 950 - 2150 |
| Input level range | dBm | -65...-25 |
| LNB powering | V @ mA | 14/18@ 1000 max |
| Input impedance | Ω | 75 |
| DiSEqC | NO | |
| User's interface | Numeric keypad | |
| 22 kHz tone | ON | |
| Transponder memories | 81 | |
| Measurement memories | 8 | |
| AC/DC adapter | V/Hz | 100-240 / 50/60 |
| Operating time (LNB current consumption:120 mA) | h | 4 |
More about RF measurements in the article Antenna Signal Measurements
273.76 EUR | ||
Discount: 0% | ||
