View of the module

ULTIMODE optical modules are compliant with SFP (Small Form-factor Pluggable) standard. ULTIMODE SFP-011M cooperates with two multimode fibers transmitting data at speeds up to 155 Mb/s.
The maximum transmission distance depends on the type of multimode fiber used. It is 500 m for 50/128 fiber or 300 m for 62.5/128 um fiber.

SFP modules of ULTIMODE series are equipped with LC connectors. The main advantages of LC connectors are a small size (possibility of dense packing) and a snap locking system for protection against accidental disconnection.

The ULTIMODE modules cooperate with media converters and majority of switches and routers with SFP slots (also with CISCO equipment) compatible with IEEE 802.3u 100Base-FX standard.

The use of media converters with the possibility of exchanging SFP modules is particularly advantageous when it comes to network configuration changes. Instead of replacing the entire unit/s, it is sufficient to exchange the SFP transceiver/s.

Name:	ULTIMODE SFP-011M
Code:	L1401
Standard:	SFP (IEEE 802.3u 100Base-FX)
Optical fiber type:	multimode (50/125 μm, 62.5/125 μm)
Optical connectors:	LC
Transmission range:	up to 550 m (50/125 μm), up to 300 m (62.5/125 μm)
Transmission speed:	up to 155 Mb/s
Wavelength (Tx/Rx):	850 nm / 850 nm
Operating temperature range:	0oC ... 70oC
Power:	3.3 VDC (from SFP port on the motherboard)

 

We also offer Fast Ethernet SFP module cooperating with single-mode fibers, with transmission range up to 20 km - L1411.

Fast Ethernet modules L1401 and L1411 are not compatible with Gigabit media converter M-100G/SFP L1301.

Aside from Fast Ethernet SFP modules we offer Gigabit SFP modules supporting 802.3z 1000Base-FX standard and cooperating with ULTIMODE M-100G/SFP L1301 media converters: