MY CART
My Cart is empty

SFP Modules

Gigabit Ethernet

SFP Transceiver: ULTIMODE SFP-203G 2xLC (two single-mode fibers up to 20 km)
Code: L1415
Price w/o taxPriceDisc.Validity  
17.02 EUR17.02 EUR0 %
Optical SFP module ULTIMODE-203G cooperates with single-mode fibers up to 20 km long, at data transmission speeds up to 1.25 Gb/s.
SFP Transceiver: ULTIMODE SFP-203G 2xLC (two single-mode fibers up to 20 km)
View of the module
Distinguishing features
  • duplex transmission using two single-mode fibers,
  • transmission speed up to 1.25 Gb/s (IEEE 802.3z 1000Base-FX),
  • transmission range up to 20 km,
  • LC optical connectors.
ULTIMODE optical modules are compliant with SFP (Small Form-factor Pluggable) standard. ULTIMODE SFP-203G cooperates with two single-mode fibers and transmits data at speeds up to 1.25 Gb/s. The maximum transmission range is 20 km.
SFP modules of ULTIMODE series are equipped with LC connectors. The main advantages of LC connectors are a small size (possibility of dense packing) and a snap locking system for protection against accidental disconnection.
Gigabit (GbE) SFP modules of ULTIMODE series cooperate with media converters and majority of switches and routers with SFP slots (also with CISCO equipment) compatible with IEEE 802.3z 1000Base-FX standard. An example of media converter cooperating with such modules is M-100G/SFP L1301.
The use of media converters with the possibility of exchanging SFP modules is particularly advantageous when it comes to network configuration changes. Instead of replacing the entire unit/s, it is sufficient to exchange the SFP transceiver/s.
Specifications:
Name:ULTIMODE SFP-203G
Code:L1415
Standard:IEEE 802.3z 1000Base-FX
Optical fiber type:single-mode (8.3/125μm, 8.7/125μm, 9/125μm, 10/125μm)
Optical connectors:LC
Transmission range:up to 20 km
Transmission speed:up to 1.25 Gb/s
Wavelength (Tx/Rx):1310 nm / 1310 nm
Tx Power/ Rx Sensivity
-8...-3 / > -22 dBm
Operating temperature range:0oC ... 70oC
Power:3.3 VDC (from SFP port on the motherboard)
Ethernet media converter M-100G/SFP can cooperate with the following GbE SFP transceivers:
GbE ULTIMODE transceivers:
Name:SFP-023GSFP-2-3GSFP-203/5GSFP-205/3GFP-203/5G
SFP-205/3G
Code:L1405L1415L1416L1417 L1418L1419
Type of optical fiber:multimodesingle-mode
Transmission range:2 km20 km
Transmission speed:1.25 Gb/s
Wavelength (Tx/Rx):1310/1310 nm
1310/1550 nm
1550/1310 nm
 1310/1550 nm
 1550/1310 nm
Connectors:2x LC1x SC 1x LC
Price w/o taxPriceDisc.Validity  
17.02 EUR17.02 EUR0 %
 
SFP Transceiver: ULTIMODE SFP-203G 2xLC (two single-mode fibers up to 20 km)
Code: L1415