SFP Modules
WDM
SFP Transceiver: ULTIMODE SFP-205/3G SC (single-mode fiber up to 20km)
Code: L1417
Price
Disc.
Quantity
65.51 EUR
0 %
Opticalmodule ULTIMODE SFP-205/3G SC cooperates with a single-mode fiber up to 20 km long, at data transmission speeds up to 1.25 Gb/s.
View of the module
Distinguishing features
- bidirectional communication via single fiber (WDM),
- cooperation with single-mode networks,
- transmission speed up to 1.25 Gb/s (IEEE 802.3z 1000Base-FX),
- transmission range up to 20 km,
- optical connector: SC.
ULTIMODE optical modules are compliant with SFP (Small Form-factor Pluggable) standard. ULTIMODE SFP-205/3G SC cooperates with a single-mode fiber, converting and transmitting/receiving data at speeds up to 1.25 Gb/s. This is made possible through the use of wavelength-division multiplexing (WDM) technology that multiplexes two optical carrier signals on a single optical fiber by using different wavelengths, which reduces installation costs. The maximum transmission range is 20 km.
The optical signal is transmitted in the III transmission window (1550 nm) and received in the II transmission window - 1310 nm. The complementary module to SFP-205/3G is the transceiver SFP-203/5G SC L1416 which transmits data in the II transmission window and receives them in the III.
This type of ULTIMODE SFP transceivers cooperates with SC connector terminating a single-mode fiber. SC connectors are currently the most popular optical coupling elements due to simple matching (push-pull coupling with a snap) and rectangular cross-section allowing dense packing of the connectors on the panel.
Gigabit (GbE) SFP modules of ULTIMODE series cooperate with media converters and majority of switches and routers with SFP slots (also with CISCO equipment) compatible with IEEE 802.3z 1000Base-FX standard. An example of media converter cooperating with such modules is M-100G/SFP L1301.
The use of media converters with the possibility of exchanging SFP modules is particularly advantageous when it comes to network configuration changes. Instead of replacing the entire unit/s, it is sufficient to exchange the SFP transceiver/s.
Specifications:
| Name: | ULTIMODE SFP-205/3G |
| Code: | L1417 |
| Standard: | IEEE 802.3z 1000Base-FX |
| Optical fiber type: | single-mode (8.3/125μm, 8.7/125μm, 9/125μm, 10/125μm) |
| Optical connector: | SC |
| Transmission range: | up to 20 km |
| Transmission speed: | up to 1.25 Gb/s |
| Wavelength (Tx/Rx): | 1550 nm / 1310 nm |
| Operating temperature range: | 0oC ... 70oC |
| Power: | 3.3 VDC (from SFP port on the motherboard) |
Ethernet media converter M-100G/SFP can cooperate with the following GbE SFP transceivers:
GbE ULTIMODE SFP transceivers:
| Name: | SFP-023G | SFP-2-3G | SFP-203/5G | SFP-205/3G | FP-203/5G | SFP-205/3G |
| Code: | L1405 | L1415 | L1416 | L1417 | L1418 | L1419 |
| Type of optical fiber: | multimode | single-mode | ||||
| Transmission range: | 2 km | 20 km | ||||
| Transmission speed: | 1.25 Gb/s | |||||
| Wavelength (Tx/Rx): | 1310/1310 nm | 1310/1550 nm | 1550/1310 nm | 1310/1550 nm | 1550/1310 nm | |
| Connectors: | 2x LC | 1x SC | 1x LC | |||
Price
Disc.
Quantity
65.51 EUR
0 %
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
How to design, install, and operate LANs used for transmission of video data (IP CCTV). Video surveillance systems based on IP CCTV devices need adequate IP networks for... more »