38mm/1.5 m hot-dip galvanized steel antenna mast that can be combined /system A/

Support

Details

The 1.5 m long hot-dip galvanized steel mast is made of a 38 mm diameter pipe with a 1.5 mm thick wall. The hot-dip galvanizing process ensures corrosion resistance and long-term durability.
Mast weight: 2.3 kg
Connecting masts into a single permanent whole
Special embossments at the tip make it possible to connect elements.
The mast is designed to form an element of a larger whole. A special embossing at the tip makes it possible to connect two elements: one segment should be driven into another so that their embossings overlap by 12 cm. Once the segments are joined together, they cannot be disassembled.
Being able to join masts together is particularly important because:
  • it enables cheap and easy shipment (delivering a long mast is often very expensive or impossible),
  • shorter elements are much easier to transport by car and take up to the roof,
  • it makes it possible to adjust mast height to specific needs.
The maximum height of the composite mast depends on:
  • the selected safety coefficient,
  • the weight and surface area (wind resistance) of suspended elements,
  • the antenna arrangement (larger antennas should be placed at the bottom),
  • the type and rigidity of the wall/chimney clamp,
  • the type and number of additional anchoring clamps.
Two 1.5 m masts joined together
The following masts can be combined in any configuration:
  • Steel antenna mast 1.0 m diameter 38 mm E9038101
  • Steel antenna mast 1.5 m diameter 38 mm E9038151
  • Steel antenna mast 2.0 m diameter 38 mm E9038201

Specifications

Product type Mast
Material Steel
braid coverage Hot-dip galvanizing
Mast joining system A
Length m 1,5
Diameter mm 38
Wall thickness mm 1,5
Weight kg 2,3