MY CART
My Cart is empty

TV & SAT TV

Diagrams

Tap multiswitch system in apartment building (for one satellite)
APPLICATION OF 5-INPUT MULTISWITCHES OF MSV-5xx SERIES
Here's an example of installation diagram in apartment building. The system provides each outlet with all available terrestrial broadcasts and satellite programs from one satellite (chosen at the stage of initial planning, usually by the administrator of the building). The antennas (including high-gain UHF antenna A2670) and triplexer are mounted on the roof. The set of channel amplifiers and rest of the equipment are placed inside the building. The amplifiers allow to equalize input levels of terrestrial signals, which is very important in the case so large distribution networks. The system has to be designed and installed by professional installation company.
The distribution network is comprised of TERRA multiswitches of MSV series and satellite taps with different tap attenuation levels. The biggest advantage of such a system is its flexibility. Thanks to the wide range of TERRA multiswitches, the designer has virtually limitless possibilities of creating the network and choosing the right equipment. The system is expandable and allows to implement new functions in the future.
The diagram shown below allows to distribute terrestrial and satellite signals to 56 outlets. The individual MSV-504 R70704 or MSV-508 R70708 multiswitches can be replaced by models with a greater number of outputs. There are available MSV multiswitches with 4, 8, 12, 16, 24 or 32 outputs. Designing multiswitch systems it is worth to remember about double-tuner PVRs - each of them requires two independent signal lines.
The whole system is powered from SA-501 R70501 amplifier via H lines. Amplifiers of this series are characterized by current capacity equal to 2 A. In a typical installation it means is that one device can power 8-10 multiswitches. Converting it into the number of subscriber outlets - using a single connection to the power network we can deploy up to 300 outlets.
A very important issue is the choice of a suitable cable. On one hand - the cable should be easy to lay in long trays, on the other - it has to provide the best physical parameters such as attenuation, impedance matching and shielding effectiveness. The last parameter is critical in multiswitch installations due to the fact that the trays group 5 or 9 cables running in parallel and carrying different signals (combinations of polarization/band). To avoid problems with interference, manifested by inadequate signals from some transponders, the cables must ensure at least 85 dB screening efficiency. Taking into consideration cables used in subscriber installations, TRISET-113 E1015 with 92% braid coverage has the highest screening efficiency, about 100dB (A+/A++ class).
The advantages of SMATV systems based on TERRA multiswitches of MSV series:
  • high scalability and flexibility of installations
  • unlimited design possibilities
  • possibility of powering the whole distribution network from a single amplifier or multiswitch (one amplifier of SA series can power up to 8-10 multiswitches)
  • double-row arrangement of outputs reducing dimensions of the devices
  • standardized arrangement outputs allowing to connect several devices using fast F connectors
  • the parameters given by the manufacturer -TERRA company - are guaranteed values (e.g. isolation between inputs), which ensures repeatability of the equipment; the actual parameters are even better
Steel Satellite Dish: FAMAVAL 110 LH (110cm)Universal QUATRO LNB: Inverto Red Extended 0.3dBUniversal bracket for second LNBFM Antenna: Dipol 1RUZ PM B (omnidirectional H+V)UHF TV Antenna: DIPOL 44/21-60 Tri DigitAntenna Triplexer ZA-104Ms (FM/6-12/21-69/75)Coaxial Cable (75 ohm): TRISET-113 1.13/4.8/6.8 [1m]SAT/TV Splitter: Terra SD-504SAT/TV TAP: Terra SS-520SAT/TV TAP: Terra SS-515SAT/TV TAP: Terra SS-510Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)SAT/TV TAP: Terra SS-520SAT/TV TAP: Terra SS-515SAT/TV TAP: Terra SS-510Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Amplifier for 5-input multiswitches: Terra SA 51 Subscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATSubscriber Terminal Outlet: Signal R-TV-SATMultiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)Multiswitch Terra MV-508 (5-in, 8-out, IF gain adjustment)DAB / Band III Antenna: DIPOL-4/DAB
Tap system for one satellite, suitable for 30-120 outlets

SatNet program allows to design a practical implementation of the system.
To select the right components, the data for the design must contain:
  • network topology,
  • levels of satellite signals,
  • levels of terrestrial signals,
  • attenuation of the cable/s.
Each element of the installation has its control points (connections with the rest of the network, including the cable runs). Clicking on them, the user of the program can see detailed characteristics (signal levels for different frequencies). If the signals meet the adopted criteria, they are colored in green, if some levels are too low - in blue, if too high - in red. In the diagram below all the points are in green - the project is consistent with the assumptions.
Screenshot from SatNet utility
The design made with the SatNet program can be saved to a file. The file saved for the case shown above can be downloaded here. So anyone can install the SatNet program and load this file to test the utility - and modify the original example (e.g. by extending it).