MY CART
My Cart is empty

Discontinued items

Twin Slot Interface for Clone+ Card Splitter
Code: A9912
Withdrawn from the offer
Twin Slot Interface for Clone+ Card Splitter
Twin Slot Interface Clone+
Twin Slot Interface for Clone+ Card Splitter
View of the packaging
Twin Slot Interface A9912 is dedicated for Wireless Smart Card Splitter Clone+ A9910. In cooperation with the splitter it allows multi-room service (with up to 8 satellite receivers), using two smart cards that provide access to different channels.
The principle of operation of Twin Slot Interface Clone+
Each of the wireless client cards cooperating with the splitter has to be assigned to one of the subscription cards. Then the both subscription cards should be inserted into the Twin Slot Interface, which is put into main unit of the A9910 splitter. The user in a room can watch at the moment the channels assigned to the wireless client card from one of the subscription cards (other users in different rooms can use the same or the other channel package).
Note: For trouble-free use of the interface the user should update the software for the A9910 splitter to the latest version.
The latest firmware can be downloaded from the manufacturer's site.
Main features:
  • Support for two different subscription cards
  • Cooperation with all pay-TV platforms using the following encryption methods: Conax, CryptoWorks, Irdeto, MediaGuard, Viaccess
  • Quick installation and easy operation
  • Fast and reliable work
  • 24-month warranty
Aluminum Satellite Dish: FAMAVAL Off-Set 100 LH (100cm)Compression F Connector: PCT TRS-9 NT<br />(for TRISET-113) QUAD LNB: Inverto Red Extended 0.3 dBCoaxial Cable (75 ohm): TRISET-113 1.13/4.8/6.8 [1m]Additional Wireless Client Card for Clone+DVB-S2/DVB-T Receiver: Opticum HD TS 9600Compression F Connector: PCT TRS-9 NT<br />(for TRISET-113) Additional Wireless Client Card for Clone+DVB-S2/DVB-T Receiver: Opticum HD TS 9600Compression F Connector: PCT TRS-9 NT<br />(for TRISET-113) Wireless Smart Card Splitter: Clone+Additional Wireless Client Card for Clone+Compression F Connector: PCT TRS-9 NT<br />(for TRISET-113) DVB-S2/DVB-T Receiver: Opticum HD TS 9600Additional Wireless Client Card for Clone+Compression F Connector: PCT TRS-9 NT<br />(for TRISET-113) DVB-S2/DVB-T Receiver: Opticum HD TS 9600
The diagram showing application of the splitter.
Simultaneous reception of four different programs due to use of the main unit of A9910
and four wireless client cards A9910.
(The A9910 set contains two client cards, the other two have to be bought separately)
Description and capabilities of the whole Clone+ set:
Clone+ is a modern wireless splitter offering multi-room service , i.e. independent multiple reception of Pay TV programs (max. 8 receivers) with the use of single subscription card. It is compatible with all smart cards using the following encryption systems:
  • Conax,
  • CryptoWorks,
  • Irdeto,
  • MediaGuard,
  • Viaccess.
Digital platforms supported by the Clone+ splitter:
  • Cyfra+ (Poland),
  • Telewizja Na Karte (Poland)
  • Orange TP (Poland)
  • Digital+/Astra (Spain),
  • Canal Digitaal (Holland),
  • CanalSat (France),
  • Meo (Portugal)
  • SCT
  • Free-X TV and others...
The Clone+ set contains the main unit (server) and two client cards, which allows to receive two different programs on two televisions. If there is a need to use more televisions, the user can purchase additional client cards (A9911). The maximum capacity of the system is 8 client cards.
Clone + transfers subscription rights wirelessly. At the beginning the user has to match the client cards with the server. But this process is very simple and takes only a few minutes. There is no need for nearing the cards to the server (like in the case of multi-room service option offered by Cyfra+). Transmission range according to the manufacturer's data is 150 m in open area, which in practice corresponds to the coverage of a large one-family house.
The manufacturer ensures that Clone+ is compatible with all receivers and CI modules supporting Seca MediaGuard, including HD version. In the case of compatibility issues with a particular receiver, the manufacturer assures that the firmware will be upgraded. The most modern technology used in the Clone+ splitter provides superior television viewing experience even in harsh conditions, such as thick walls or ceilings etc.
Clone+ has the ability to update its firmware, via the included USB cable.
Installing the Clone+ set, the user should refer to the specific regulations of the satellite broadcaster (e.g. use within the household).
In order to receive encrypted TV channels using single subscription card, there are needed:
  • televisions with connected satellite receivers compatible with Seca MediaGuard system,
  • operating satellite TV system ,
  • active subscription card.
Advantages of Clone+:
  • new comfort and convenience - possibility of simultaneous, independent watching of different channels on up to 8 televisions (not 2 only as in the offer of some broadcasters);
  • simplicity of use - no need of nearing the client cards to the server e.g every six hours;
  • economy - only one subscription fee, the ability to view 8 different programs simultaneously, even on 8 televisions;
  • easy installation - it is intuitive and takes about 10 minutes;
  • wireless operation - no need for additional cables.
Specifications
NameSplitter Clone+
CodeA9911
Operating band [MHz]868 - 869.85
BW [kHz]150
ModulationGFSK
NRZ [Kb/s]38.4
Tx power [dBm]-20...+5 (adaptable)
Supplying voltage [V]9-12 (power supply incl.)
The complete user manual (in Polish and English) is available here.
The latest firmware can be downloaded from the manufacturer's site.
Withdrawn from the offer
 
Twin Slot Interface for Clone+ Card Splitter
Code: A9912