GPRS/UMTS/LTE
2 GHz
UMTS Antenna: ATK-P1/2GHz (7dBi, 5m cable, SMA R/P plug)
Code: A7045
Withdrawn from the offer
View of the antenna on a mast
Rear view
View of the SMA R/P connector terminating the cable
Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve the transmission speed.
Polarization of the antenna is marked with a sticker.
Specifications
| Name | ATK-P1/2 GHz |
| Code | A7045 |
| Length of RF-5 cable [m] | 5 |
| Connector | SMA R/P plug |
| Gain [dBi] | 7 |
| Band [MHz] | 1900-2170 |
| Polarization | V/H |
| VWSR | <2 |
| Half power beam (V) [deg] | 70 |
| Half power beam (H) [deg] | 70 |
| Impedance [ohm] | 50 |
| Dimensions [mm] | 115 x 115 |
| Weight [kg] | 0.41 |
| Mast diameter [mm] | up to 45 |
| Packaging | cardboard box |
Gain versus frequency
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Most of WLAN devices are equipped with SMA-RP connectors, whilst outdoor antennas are equipped with N-type connectors. Using H-155 cable, it is needed to end it with SMA... more »