GPRS/UMTS/LTE
2 GHz
UMTS Antenna: ATK-P1/2GHz (7dBi, outdoor, 5m cable, FME socket)
Code: A7044
Price
Disc.
Quantity
16.95 EUR
0 %
View of the antenna on a mast
Rear view
The included cable coming out from the antenna is 5m long and terminated with FME socket
Panel antenna ATK-P1/2GHz has been designed for use with UMTS terminals working in 1.9-2.1 GHz band. It definitely solves the typical problem that the signal in the place one wants to use the laptop with UMTS card or UMTS mobile is too weak. Use of the antenna provides free choice of working place, as well as can improve speed of transmission.
Polarization of the antenna is marked with the sticker place on the rear part of the housing.
Specifications
| Name | ATK-P1/2 GHz |
| Code | A7044 |
| Length of RF-5 cable [m] | 5 |
| Connector | FME female |
| Gain [dBi] | 7 |
| Band [MHz] | 1900-2170 |
| Polarization | V/H |
| VSWR | <2 |
| Half power beam (V) [deg] | 70 |
| Half power beam (H) [deg] | 70 |
| Impedance [ohm] | 50 |
| Dimensions [mm] | 115 x 115 |
| Weight [kg] | 0.41 |
| Mast diameter [mm] | up to 45 |
| Packaging | cardboard box |
Gain versus frequency
Price
Disc.
Quantity
16.95 EUR
0 %
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Most of WLAN devices are equipped with SMA-RP connectors, whilst outdoor antennas are equipped with N-type connectors. Using H-155 cable, it is needed to end it with SMA... more »