Installation Components
Baluns
UTP Video Receiver: TRO-4/400
Code: M1670
Price
Disc.
Quantity
26.29 EUR
0 %
View of the device
Front view
TRO-4/400 is designed to power CCTV cameras with DC voltage and receive video signals from four TRN-1/400 video transmitters M1668, via a twisted pair cable (UTP, FTP), over distances up to 400 meters. The device is fed with 24-29 VAC coming from an external AC power supply.
The camera signal provided to one of TRN-1/400 transmitters (M1668) is sent via a twisted pair cable to the TRO-4/400 receiver. This way the transmitter matches the impedance of 75 ohm coaxial cable to that of the outgoing twisted pair, which allows transmission of the video signal over longer distances (up to 400 meters). The receiver performs the reverse operation.
The TRO-4/400 receiver feeds the twisted pair cable with unstable DC voltage (max 40V) which is later stabilized at the level of 12V in the TRN-1/400 transmitter (M1668). This allows to power four cameras equipped with heaters and thermostats.
On the assumption that the power consumption of a camera equals 250mA (12V) and that of a thermostat is 500mA (12V), e.g. TT-12E, then power can be sent with standard 0.5 mm twisted pair cable (24AWG) over the following distances:
No. | Type of load | Max distance at AC29V | Max distance at AC24V |
| 1. | 4 cameras with thermostats | 4 x 420m | |
| 2. | 3 cameras with thermostats + one without | 3x440m + 1x1200 m | |
| 3. | 2 cameras with thermostats | 2x480m + 2x1400 m | 3x55m + 1x190m |
| 4. | 1 camera with thermostat | 1x480m + 3x1500m | 2x130m + 2x720m |
| 5. | 4 cameras without thermostats | 4x1700m | 4x720 m |
For distances greater than 400m a video amplifier should be installed.
| Name | TRO-4/400 |
| Code | M1670 |
| Video bandwidth | up to 50 MHz |
| Nominal video loss | 0.5 dB (at f = 5 MHz) |
| Impedance of the coaxial outputs | 75 ohm |
| Impedance of the symmetrical inputs | 100 ohm |
| Types of connectors | 4 x BNC sockets |
| Types of symmetrical cable connectors | 4 x RJ-45 sockets (8 pin, 4 pairs) |
| Power input (max parameters) | 29VAC / 2A |
| Max. output voltage | 40VDC |
| Max. current (40VDC) | 2A |
| Weight | 100 g |
| Dimensions | 117x64x30 mm |
Connection diagram: the device with 4 cameras without thermostats
Price
Disc.
Quantity
26.29 EUR
0 %
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
Although the system has been developed for one-family houses and small buildings, it is compliant with the latest Regulation of the Minister of Infrastructure in Poland... more »