Building System
Tools
Stripping Tool: VC-VOT (for cutting windows in easy access cables)
Code: L5911
VC-VOT tool designed to cut windows in ULTIMODE BS cables with easy fiber access.
View of the stripper
Distinguishing features:
- A special tool for cutting a breakout window without a risk of damage to the fibers;
- Ease of use.
The VC-VOT tool is designed to cut windows in ULTIMODE BS easy access cables. The tool is simple to use and does not damage the fibers. It is intended for the following ULTIMODE BS cables:
In the case of using the VC-VOT tool for stripping the ULTIMODE BS-12SM cable with 12 fibers ( L7712), the stripper has to be equipped with the included adapter. It protects the cable of small diameter against excessively deep cut and risk of damaging the fibers.
The window must be located between the two aramid strands strengthening the cable sheath. The window should have a length of 80 mm.
Installation of easy access riser cables
 |  |
The way of cutting access window in a VertiCASA cable. One window should be located on the top floor of the building and the second on the floor on which the subscriber is to be connected. | View of the window cut in an ULTIMODE cable |
 |  |
The fiber designed for connecting the subscriber has to be gently pull out of the cable through the window on the top floor and cut. | The same fiber has to be gently pull out on the subscriber's floor. |
COMPLETE WITH
![Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]](pict.main/l5550_.gif)
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
ADSL service (Asymmetric Digital Subscriber Line) is one of the most popular ways of getting Internet access, especially in the case of home users. To share the service... more »