MY CART
My Cart is empty

Wireless Telemetry Module CD04 (for PTZ cameras)
Code: M1570
Withdrawn from the offer
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the module

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the module without front cover
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Bottom view
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Top view

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The included mount (components)

Wireless telemetry module CD04 with output power of 500 mW, operating in unlicensed ISM band (869 MHz), is used in professional CCTV systems in order to control advanced PTZ cameras and DVRs over distances up to 6 km. It implements bi-directional transmission of telemetry data (half duplex), which is required for most PTZ cameras (e.g. for supporting alarm functions of the cameras and sending command confirmations).
The CD04 system is designed to meet all requirements for CCTV applications and modern automation. It can be easily combined with CAM5816h M1558, TCO5807h M1559, and other wireless devices used in CCTV systems. The module can fully replace a wired link because it does not limit control functions. It is compatible with all types of PTZ cameras and DVRs supporting any control protocol and using RS485 or RS232 interface.
Among many protocols the system supports PELCO-D , PELCO-P , LG Multix , D-max , VICON, GANZ, SAMSUNG , COP-2 , Santachi , PANASONIC , Longcomity , HUNDA600 , LILIN , VICON , MOLYNX , KALATEL , VCL , Reserved , ALEC, COP-1 , Ultrak , BOSCH Bi-faza (with additional converter), ARITECH, Sensormatic, Baxal, Dynacolor.
Applications
  • two way transmission of RS485, RS232, TTL 5V signals
  • control of PTZ cameras
  • control of DVRs
  • remote control of alarm and fire protection systems
Distinguishing features
  • 10 non-overlapping channels
  • output power 500 mW / 200 mW (switchable)
  • transmission speed 1200 to 9600 bps
  • half duplex
  • operation in unlicensed ISM band (869 MHz)
  • no latency
  • transmission transparency for the protocol employed
  • no need for optical visibility of antennas
  • possibility of linking the systems in series (for longer distances)
  • outdoor housing
  • quick and easy installation
The CD04 kit consists of:
  • 2-way transmission module with stub antenna (1 pc.)
  • Mount for 35-50 mm mast (1 set)
  • User manual and compliance declaration
The CD04 telemetry systems operate in point-to-multipoint topology, i.e. - one CD04 module cooperates with the console and and each PTZ camera is connected with its individual module.
Specifications
NameTelemetry Module CD04
CodeM1570
Operating frequency
869.40...869.65 MHz
Output power
200 mW / 500 mW
Max range
6 km
Number of available channels
10
InterfacesRS485, RS232, TTL 5
Transmission speeds
1200, 2400, 4800, 9600bps
Rx sensitivity
-115 dBm
Antenna impedance
50 Ω
Modulation
RC2FSK
Power10...15 VDC, 400mA
Operating temperature-20...+55°C
EnvironmentOutdoor or indoor use
Dimensions80x120x75mm
Deklaracja zgodności (Compliance declaration)
PL0.1 MB2010.06.20
User manual
EN0.08 MB2010.06.20
Instrukcja obsługiPL0.13 MB2010.06.20
Withdrawn from the offer
 
Wireless Telemetry Module CD04 (for PTZ cameras)
Code: M1570